PT-RZ12KU 3-Chip DLP™ Large Venue Laser Projector

 
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

PT-RZ12K

Product details

Compact 12,000 lumens Solid Shine laser projector designed for long-lasting stable brightness in events and staging. Exchangeable lens - 24/7 Operation, Digital Link,  High Frame Rate 120 Hz, Geometric Adjustment, Portrait Mode, Digital Link, 20 000:1

Key features
  • Laser 3-chip DLP, 12,000 lumens, WUXGA
  • 120Hz high frame rate for superb and sharp motion pictures
  • Lamp-free laser projection and dust resistant liquid cooling system with 20000 hours of free maintenance
  • 20,000:1 contrast ratio
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
View Product Support

Chat with Sales

Brightness 12,000 lumens
Resolution 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
Lamp 3-Chip DLP Laser
Power supply AC 100-240 V 50/60 Hz
Power consumption 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
Average power consumption
NORMAL: 800W ECO: 680W LONG LIFE1: 620W LONG LIFE 2: 590W
LONG LIFE 3: 550W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (22 ft 12 in),
ICE627087: 2008 Broadcast contents,
Picture mode: Dynamic, Dynamic Contrast3
BTU value Max 4,096 BTU
DLP™ chip | Panel size 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ chip | Display method DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip | Pixels 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
LENS Optional powered zoom/focus lenses
Light source Laser Diode (Laser class: Class 1)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (22ft 12in), Dust: 0.15mg/m³
43,800 hours at constant luminance (Longlife1)
61,320 hours at constant luminance (Longlife2)
87,600 hours at constant luminance (Longlife3)
Screen size 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120-600 inches) with the ET-D75LE90 (16:10 aspect ratio)
Center-to-corner uniformity 90%
Contrast 20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Scanning frequency | SDI SD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE ST 259 compliant: 525i(480i), 625i(576i)
Single-link HD-SDI signal (YPBPR 4:2:2 10-bit):
SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i,
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p,
1125(1080)/24sF, 1125(1080)/30p
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 372 compliant: 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p
2048 x 1080/24p, 2048 x 1080/24sF,
Dual-link HD-SDI signal (X Y Z 4:4:4 12-bit):
SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF,
3G-SDI signal (YPBPR 4:2:2 10-bit):
SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p
3G-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p
Dual-link 3G-SDI signal (YPBPR 4:4:4 12-bit/10-bit):
SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i,
2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p
Dual-link 3G-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 425 compliant: 1125(1080)/60i, 1125(1080)/50i,
2048 x 1080/48p, 2048 x 1080/50p, 2048 x 1080/60p
Scanning frequency | HDMI/DVI-D Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz,
dot clock: 25 MHz - 162 MHz
Scanning frequency | RGB Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz,
dot clock: 162 MHz or less
Scanning frequency | YPBPR (YCBCR) 525i (480i): fH 15.73 kHz; fV 59.94 Hz,
625i (576i): fH 15.63 kHz; fV 50 Hz,
525p (480p): fH 31.47 kHz; fV 59.94 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency | Video/Y/C fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift | Vertical ±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90),
from center of screen, powered
Optical axis shift | Horizontal ±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone correction range Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90),
horizontal: ±15° (0° with the ET-D75LE90)
Installation Ceiling/floor, front/rear
Terminals | SDI IN 1 BNC x 2,
Dual-link 3G-SDI signal: SMPTE ST 425 compliant
3G-SDI
(3G/HD/SD-SDI, Dual-link HD-SDI, Dual-link 3G-SDI)
signal: SMPTE ST 424 compliant
Dual-link HD-SDI signal: SMPTE ST 372 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
Terminals | HDMI IN HDMI 19-pin x 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only.
Terminals | DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals | RGB 1 IN BNC x 5
Terminals | RGB 1 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 IN | Video in BNC x 1, 1.0 Vp-p 75 ohms
Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
Terminals | RGB 2 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | 3D SYNC 1 IN/OUT BNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals | 3D SYNC 2 OUT BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals | SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | SERIAL OUT D-sub 9-pin (male) x 1 for link control
Terminals | Remoter 1 In M3 jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 jack x 1 for link control
Terminals | Remoter 2 In D-sub 9-pin x 1 for external control (parallel)
Terminals | DIGITAL LINK/LAN RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) 578 x 323.5 x 740 mm
(22-3/4 x 12-23/32 x 29-1/8 inches) (without lens)
Weight 44 kg (97.0 lbs) (without lens)
Operating noise 43 dB
Operating temperature Normal
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes from 700 m to 2,700 m (2,297 ft to 8,858 ft) above sea level,and at operating temperatures of 25°C (77°F) or more at altitudes from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level.)
Eco/Long life 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Brightness is limited at operating temperatures of 35°C (95°F) or more at altitudes up to 2,700 m (8,858 ft) above sea level. The projector cannot be used at altitudes of 2,700 m (8,858 ft) or more above sea level.)
When the projector is used with a Smoke Cut Filter
The operating temperature range is 0°C to 40°C (32 °F to 104 °F).
(The projector cannot be used at altitudes of 1,400 m (4,593 ft) or more above sea level.)
* The brightness of the light source may drop depending on the operating
temperature range. The higher the temperture, the greater the drop in the brightness of the light source will be.
Applicable software 10%-80% (no condensation)
Technology 3-chip DLP Laser
<sup>(1)</sup> Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.<br/>
<sup>(2)</sup> Maximum physical resolution. Quad Pixel Drive: ON.<br/>
<sup>(3)</sup> Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.<br/>
<sup>(4)</sup> With lens other than ET-D75LE95 and power supply of AC 200 V.