PT-RZ31KU 3-Chip DLP™ Large Venue Laser Projector

 
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

PT-RZ31K

Product details

30,000 lumens-class Solid Shine laser projector with stunning image quality in a compact body designed for large venues. Exchangeable lens, 24/7 Operation, Digital Link, Geometric Adjustment, 360° flexible installation, 3D.

Key features
  • Laser 3-chip DLP, 31,000 center lumens,  WUXGA
  • Lamp-free laser projection and dust resistant liquid cooling system with 20,000 hours of free maintenance
  • 120Hz high frame rate for superb and sharp motion pictures
  • 20,000:1 contrast ratio
  • Geometric Manager Pro, color matching and edge blending
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
View Product Support

Chat with Sales

Power supply AC 100-120 V, 50/60 Hz; AC 200-240 V, 50/60 Hz
Power consumption 2,870 W (2,870 VA AC200V)
Average power consumption
(Varies depending on operation mode setting.)
HIGH: 2,310W NORMAL: 1,890W
LONG LIFE 1: 1,040-1,680W
LONG LIFE 2: 924-1,580W
LONG LIFE 3: 794-1,460W
*Operating Temperature: 25 °C (77 °F),
Altitude: 700m (2,297ft), IEC627087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic contrast [2]
0.3 W with STANDBY MODE set to ECO
4 W with STANDBY MODE set to NORMAL
BTU value Max 9,806 BTU
DLP™ chip | Panel size 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ chip | Display method DLP™chip x 3 (R, G, B), DLP™projection system
DLP™ chip | Pixels 2,304,000 (1920 x1200) x3, total of 6,912,000 pixels
LENS Optional powered zoom/focus lenses
Light source Laser Diode Laser class 1
Illumination life of set Varies depending on operation mode setting.
Luminance life for set: 18,000 hours at half luminance (HIGH)/
8,000 hours at 70% luminance
20,000 hours at half luminance (NORMAL)
43,800 hours at constant luminance (LONG LIFE 1)/
61,320 hours at constant luminance (LONG LIFE 2)/
87,600 hours at constant luminance (LONG LIFE 3)
* IEC62087: 2008 Broadcast contents, Dynamic contrast [3]
Screen size 1.78-25.4 m (70-1,000 inches) (16:10 aspect ratio)
1.78-15.24 m (70-600 inches) with the ET-D75LE8 (16:10 aspect ratio)
3.05-15.24 m (120 - 600 inches) with the ET-D75LE95 (16:10 aspect ratio)
Brightness*1 Varies depending on operation mode setting.
30,000 lm*2*4/31,000 lm*3*4 (Center) (HIGH)
25,000 lm*2*4/26,000 lm*3*4 (Center) (NORMAL)
12,000 lm at constant luminance (LONG LIFE 1)
10,000 lm at constant luminance (LONG LIFE 2)
8,000 lm at constant luminance (LONG LIFE 3)
Center-to-corner uniformity*1 90%
Contrast*1 20,000:1 (full on/full off, in Dynamic Contrast 3 mode)
Resolution 1920 x1200 pixels (Input signals that exceed this resolution will be
converted to 1920 x1200 pixels.)
Scanning frequency | Video/Y/C fH:15.73KHz fV:59.94Hz, fH:15.63KHz fV:50Hz
Scanning frequency | RGB • Resolution: 640 x 400 pixels to 1920 x 1200 pixels
• Dot clock frequency: 162MHz or less
• PIAS (Panasonic Intelligent Auto Scanning)
Scanning frequency | YPBPR (YCBCR) • Resolution: 480i/576i to 1920 x 1080 pixels
• Dot clock frequency: 148.5MHz or less
• The SYNC/HD and VD terminals do not support 3 value SYNC.
Scanning frequency | DVI • Moving image signal resolution: 480i*5/576i*5 to 1920x1080
Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
• Dot clock frequency: 25 MHz to 162 MHz
Scanning frequency | HDMI/DIGITAL LINK • Moving image signal resolution: 480i*5/576i*5 to 1920x1080
Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
• Dot clock frequency: 25 MHz to 162 MHz
Scanning frequency | SDI SD-SDI signal
HD-SDI signal
3G-SDI signal
Optical axis shift | Vertical ±55% (±44% with the ET-D75LE6), (+68-78% with the ET-D75LE95),
from center of screen, powered
Optical axis shift | Horizontal ±20% (±15% with the ET-D75LE6), (±12% with the ET-D75LE95),
from center of screen, powered
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Installation Ceiling/floor, front /rear, free 360-degree installation
Terminals | RGB 1 IN BNC x 5
Terminals | RGB 1 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 IN | Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | RGB 1 IN | Video in BNC x 1, 1.0 Vp-p, 75 ohms
Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
Terminals | RGB 2 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | DVI-D IN DVI-D 24-pin x1
Single link, DVI 1.0 compliant, HDCP compatible
Terminals | HDMI IN HDMI 19-pin x1
HDCP compatible, Deep Color compatible
Terminals | SDI IN 1 BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI (LINK-A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425 compliant
Terminals | SDI IN 2 BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI (LINK-B) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 2) signal SMPTE ST 425 compliant
Terminals | DIGITAL LINK RJ-45
HDBaseT™ compliant, HDCP compatible, Deep Color compatible
Terminals | 3D Sync 1 In/Out / Multi Projector Sync In BNC x 1, IN : TTL Hi-z OUT : TTL max10mA
Terminals | 3D Sync 2 Out/Multi Projector Sync Out BNC x 1, TTL max10mA
Terminals | SERIAL IN D-sub 9 pin x 1 for external control (RS-232C compliant)
Terminals | SERIAL OUT D-sub 9 pin x 1 for link control
Terminals | Remoter 1 In M3 stereo mini jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 stereo mini jack x 1 for link control
Terminals | Remoter 2 In D-sub 9 pin x 1 for external control (parallel)
Terminals | DIGITAL LINK/LAN RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,
compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP)
Terminals | DC OUT 5V USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA)
Power cord length 3.0 m (9 ft 10 in) ft
Cabinet materials Processed metal parts, Molded plastic
Dimensions (W x H x D) 700 x 418*8x1,250 mm
(27-9/16 x 16-15/32 x 49-7/32 inches) (with protrusion parts)
700 x 373*9x1,070 mm
(27-9/16 x 14-11/16 x 42-1/8 inches) (without protrusion parts)
Weight*10 79 kg (174.2 lbs)
Operation noise*2 49 dB
Operating temperature Varies depending on operation mode setting.
HIGH/NORMAL
The operating temperature range is 0°C to 50°C (32 °F to 122 °F).
(Less than 1,400m (4,593 ft) above sea level)
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 1,400m (4,593 ft) to 4,200m (13,780 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher and at
less than 2,700m (8,858 ft) above sea level, or at ambient operating
temperatures of 25 °C (77 °F) or higher and between 2,700m (8,858 ft) and
4,200m (13,780 ft) above sea level, the brightness of the light source may
drop in order to protect the projector.
LONG LIFE 1/2/3
The operating temperature range is 0°C to 45°C (32 °F to 113 °F).
(Less than 2,700m (8,858 ft) above sea level)
• If using at ambient operating temperatures of 35 °C (95 °F) or higher,
the brightness of the light source may drop in order to protect the projector.
When using a smoke cut …lter (regardless of operating mode)
0 °C to 40 °C (32 °F to 104 °F) Less than 1,400 m (4,953 ft) above sea level
Operating humidity 10%-80% (no condensation)
Note For details of the types of video signals that can be used with the projector, refer to “List of compatible signals”
*1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal
cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by
the ISO/IEC 21118:2012 international standards.
*4 In AC200V, When using a projection lens other than ET-D75LE95.
*5 Pixel-Repetition signal(dot clock frequency 27.0MHz) only
*6 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from the screen.
*7 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
*8 With legs at shortest position.
*9 Without legs.
*10 Average value. May differ depending on the actual unit.
Brightness 31,000 lumens (Center)
Technology 3-Chip DLP Laser
Filter life Varies depending on operation mode setting.
Filter life | Normal filter 4,000 hours (NORMAL)/2,000 hours (HIGH)/ 20,000 hours (LONG LIFE 1/2/3)
Filter life | Long life filter unit 20,000 hours (NORMAL)/4,000 hours (HIGH)/ 40,000 hours (LONG LIFE 1/2/3)
<sup>(1)</sup> Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.<br/>
<sup>(2)</sup> Maximum physical resolution. Quad Pixel Drive: ON.<br/>
<sup>(3)</sup> Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.<br/>
<sup>(4)</sup> With lens other than ET-D75LE95 and power supply of AC 200 V.