PT-DW11KU 1-Chip DLP™ Large Venue Projector

 
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

PT-DW11K

Product details

Compact 12000 lumens-class Projector. Designed for events and staging applications

Key features
  • 3-chip DLP, 11000 lumens, WXGA
  • High brightness and high contrast ratio make bright, crisp and sharp image
  • Dual lamp system with Lamp Relay mode enables 24/7 operation
  • 10,000:1 contrast ratio
  • Edge blending function and colour matching
  • Thumbnail
View Product Support

Chat with Sales

Power supply 120 V AC, 9.1 A, 50/60 Hz; 220-240 V AC, 4.8 A, 50/60 Hz
Power Consumption (120V AC, 50/60Hz) 980 W (1,010 VA) (0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.)
Power Consumption (220-240V AC, 50/60Hz) 950 W (980 VA) (0.3 W with standby mode set to eco. 9 W with standby mode set to normal. Both with fan stopped.)
DLP™ chip Panel size 21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ chip Display method DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip Pixels 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
LENS Optional powered zoom/focus lenses
Lamp 380 W UHM lamps (x 2) (dual lamp, high mode)
Screen size 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:10 aspect ratio
Brightness 11,000 lumens (dual lamp, high mode)
Center-to-corner uniformity 90%
Contrast 10,000:1 (full on/full off, in dynamic iris 3 mode)
Resolution 1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.)
Scanning Frequency (HDMI/DVI-D/RGB) Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz, dot clock: 25-162 MHz or lower (HDMI/DVI: 25 MHz - 162 MHz)
Scanning frequency YPBPR (YCBCR) 525i (480i): fH 15.75 kHz; fV 60 Hz, 625i (576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video/S-Video) fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical ±70% (±60% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Optical axis shift Horizontal ±30% (±20% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone correction range Vertical ±40°(vertical ±22° with the ET-D75LE5/LE50, vertical ±28° with the ET-D75LE6)
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p,750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p,1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p,1125(1080)/50p; VGA (640 x 480) - WUXGA (1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
Terminals DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA (640 x 480) - WUXGA (1,920 x 1,200), dot clock: 25 MHz -162; MHz NOTE: Compatible with non-interlaced signals only
Terminals RGB 1 IN BNC x 5
Terminals RGB 1 IN R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 1 IN Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals RGB 1 IN S-Video signal Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals RGB 2 IN D-sub HD 15-pin (female) x 1
Terminals RGB 2 IN R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 2 IN Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals VIDEO IN BNC x 1, 1.0 Vp-p, 75 ohms
Terminals 3D SYNC 1 IN/OUT BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals 3D SYNC 2 OUT BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals SERIAL OUT D-sub 9-pin (male) x 1 for link control(RS-232C compliant)
Terminals Remoter 1 In M3 jack x 1 for wired remote control
Terminals Remoter 1 Out M3 jack x 1 for link control
Terminals Remoter 2 In D-sub 9-pin x 1 for external control (parallel)
Terminals LAN RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™ (class 1)
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) 530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (without lens)
Weight 24 kg (52.9 lbs) (without lens)
Operation noise 45 dB (high mode), 43 dB (middle mode), 37 dB (eco mode)
Operating temperature 0℃ - 45℃ (32℉ - 113℉)
Operating humidity 10% - 80% (no condensation)
Technology 3-Chip DLP
<sup>(1)</sup> Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.<br/>
<sup>(2)</sup> Maximum physical resolution. Quad Pixel Drive: ON.<br/>
<sup>(3)</sup> Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.<br/>
<sup>(4)</sup> With lens other than ET-D75LE95 and power supply of AC 200 V.