PT-RZ21KU 3-Chip DLP™ SOLID SHINE Laser Projector

New
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

PT-RZ21K

Product details

Laser 3-chip DLP, 21,000 lumens (center), WUXGA resolution, Geometric Manager Pro, color matching and edge blending work together providing stunning image quality in a compact body designed for large venue applications.

Key features
  • Laser 3-chip DLP, 21,000 lumens (center), WUXGA
  • Lamp-free laser projection with dust resistant liquid cooling system for 20,000 hours maintenance free operation
  • Real maintenance-free projection with filter-less design and no need for smoke-filter
  • Un-interrupted projection with dual-light source and built in redundancy inputs
  • Geometric Manager Pro, color matching and edge blending
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
View Product Support

Chat with Sales

Technology Laser 3-chip DLP
Power supply AC 200V-240V, 7.7A, 50/60Hz
The light output will decrease to approximately 1/2 when using the projector with
AC 100V to AC 120V [9.6A].
Power consumption 1,510 W (1,525 VA [AC200V]) (0.3 W with Standby Mode set to Eco*1,
4 W with Standby Mode set to Normal)
1,217W (Normal Mode), 972 W (Eco Mode)
Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297ft),
IEC627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [2]
BTU value Max 5,159 BTU
DLP™ chip | Panel size 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ chip | Display method DLP™ chip x 3, DLP™ projection system
DLP™ chip | Pixels 6,912,000 (1920 x 1200 x 3) pixels
Refresh Rate 120 Hz*2
LENS Optional (no lens included with this model), powered zoom, powered focus lens
Light source Laser Diode (Laser class: Class 1)*Class 3R for North America.
Illumination life of set Varies depending on operation mode setting.
20,000 hours at half luminance (Normal) 24,000 hours at half luminance (Eco)
* IEC62087: 2008 Broadcast contents, Dynamic contrast [3]
(NORMAL/ECO Temperature: 30°C (86°F), Altitude 700m (2,297 ft),Dynamic
Contrast [3] Under conditions of 0.15 mg/m3 of particulate matter
Screen Size (Diagonal) 1.78-25.4 m (70-1,000 in) with 16:10 aspect ratio
1.78-15.24 m (70-600 in) with the ET-D75LE8, 16:10 aspect ratio
3.05-15.24 m (120-600 in) with the ET-D75LE95, 16:10 aspect ratio
Brightness 21,000 lm (Center)*3*5 / 20,000 lm (Normal)*4*5
Center-to-corner uniformity 90%
Contrast*3 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution WUXGA (1920 x 1200 pixels)
Scanning frequency | Video/Y/C fH:15.73KHz fV:59.94Hz, fH:15.63KHz fV:50Hz
Scanning frequency | RGB ・Resolution: 640 x 400 pixels to 1920 x 1200 pixels
・Dot clock frequency: 162MHz or less
・PIAS (Panasonic Intelligent Auto Scanning)
Scanning frequency | YPBPR(YCBCR) ・Resolution: 480i/576i to 1920 x 1080 pixels
・Dot clock frequency: 148.5MHz or less
・The SYNC/HD and VD terminals do not support 3 value SYNC.
Scanning frequency | DVI ・Moving image signal resolution: 480i*6/576i*6 to 1920x1080
・Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
・Dot clock frequency: 25 MHz to 162 MHz
Scanning frequency | HDMI/DIGITAL LINK ・Moving image signal resolution: 480i*6/576i*6 to 1920x1080
 Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
・Dot clock frequency: 25 MHz to 162 MHz
Scanning frequency | SDI SD-SDI signal
HD-SDI signal
3G-SDI signal
Optical axis shift Vertical (from center of screen) ±55 % (±44 % with ET-D75LE6, +68 % - +78 % with ET-D75LE95) (powered)
Horizontal (from center of screen) ±20 % (±15 % with ET-D75LE6, ±12 % with ET-D75LE95) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Installation Ceiling/floor, front /rear, free 360-degree installation
Terminals | RGB 1 IN BNC x 5
Terminals | RGB 1 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 IN | Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | RGB 1 IN | Video in BNC x 1, 1.0 Vp-p, 75 ohms
Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
Terminals | RGB 2 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | DVI-D IN DVI-D 24-pin x1
Single link, DVI 1.0 compliant, HDCP compatible
Terminals | HDMI IN HDMI 19-pin x1
HDCP compatible, Deep Color compatible
Terminals | SDI IN 1 BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (LINK A) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 1) signal SMPTE ST 425-3 compliant
Terminals | SDI IN 2 BNC x 1
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424, 425-2 compliant
Dual link HD-SDI (LINK B) signal SMPTE ST 372 compliant
Dual link 3G-SDI (Link 2) signal SMPTE ST 425-3 compliant
Terminals | DIGITAL LINK RJ-45
HDBaseT™ compliant, HDCP compatible, Deep Color compatible
Terminals | 3D Sync 1 In/Out / Multi Projector Sync In BNC x 1, IN : TTL Hi-z OUT : TTL max10mA
Terminals | 3D Sync 2 Out/Multi Projector Sync Out BNC x 1, TTL max10mA
Terminals | SERIAL IN D-sub 9-pin x 1 for external control (RS-232C compliant)
Terminals | SERIAL OUT D-sub 9-pin x 1 for link control
Terminals | Remoter 1 In M3 jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 jack x 1 for link control
Terminals | Remoter 2 In D-sub 9-pin x 1 for external control (parallel)
Terminals | DIGITAL LINK/LAN RJ-45 x 1 for network connection, 100Base-TX
PJLink™ (class 2) compatible, Art-Net compatible
Terminals | DC OUT 5V USB connector (type A) x 2 for power supply only (DC 5V, Max 2A)
Power cord length 3.0 m(9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) 598 x 270 x 725 mm (23 17/32inch x 10 5/8inch x 28 17/32inch ) (not including protruding parts)
Weight *9 Approximately 49kg (108 lbs) (not including lens)
Operation noise *3 46dB
Operating environment Operating temperature: 0-50 °C (32-122 °F)*10; Operating humidity: 10-80 % (no condensation)
Note *1 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain c ommands can be received for external control using the serial terminal.
*2 Refresh rate varies depending on scanning frequency.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 The value of the light output at the center region of the projected image is extracted based on the light output measurement method de・ed by the ISO/IEC 21118:2012 international standards.
*5 In AC200V, When using a projection lens other than ET-D75LE95.
*6 Pixel-Repetition signal(dot clock frequency 27.0MHz) only
*7 Only the vertical keystone correction angle can be corrected in the direction in which the projector body moves away from t he screen.
*8 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55 °.
*9 Average value. May differ depending on the actual unit
*10 Operating temperature is 0–45 °C (32–113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level.
When the [PROJECTOR SETUP] menu -> [OPERATION SETTING] -> [OPERATING MODE] is set to [NORMAL], and the operating environmen temperature exceeds the following value, the light output may be reduced to protect the projector.
•When using the projector at an altitude lower than 2,700m (8,858') above sea level: 35°C (95°F)
•When using the projector at an altitude between 2,700m (8,858') and 4,200m (13,780') above sea level: 25°C (77°F)