| Specification |
Description |
| Power supply
|
AC100 - 240V 7.1A 50Hz/60Hz |
| Power consumption
|
700W
NORMAL: 499W ECO: 428W LONG LIFE1: 287 - 402W
LONG LIFE 2: 262 - 402W LONG LIFE 3: 238 - 402W SHUTTER: 69W
STANDBY MODE [ECO]*1: 10.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2 |
| BTU value
|
Max 2389BTU |
| Lens | PT-RZ660B/W
|
Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm |
| Lens | PT-RZ660LB/LW
|
Optional powered zoom/focus lenses and xed-focus lens |
| Light source
|
Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3) |
| Screen size
|
1.27- 15.24 m (50-600 inches) (16:10 aspect ratio)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio) |
| Brightness*3
|
6,200 lumens (Center)*2/ 6,000 lumens*3
6,000 lumens (Half luminance) (NORMAL)
4,800 lumens (Half luminance) (ECO)
2,400 lumens (Constant luminance) (LONG LIFE1)
2,000 lumens (Constant luminance) (LONG LIFE2)
1,600 lumens (Constant luminance) (LONG LIFE3) |
| Center-to-corner uniformity*3
|
90% |
| Contrast*3
|
10,000:1 (All White/All Black) (Dynamic Contrast3) |
| Resolution
|
WUXGA 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.) |
| Scanning frequency | SDI
|
3G-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i,
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p,
[2K/24p], [2K/25p], [2K/30p]
3G-SDI signal (YPBPR4:2:2 10-bit):
SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p,
[2K/48p], [2K/50p], [2K/60p]
HD-SDI signal (YPBPR4:2:2 10-bit):
SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p,
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p,
1125(1080)/24sF, 1125(1080)/30p
SD-SDI signal (YCBCR4:2:2 10-bit):
SMPTE ST 259 compliant: 525i(480i), 625i(576i) |
| Scanning frequency | HDMI/DVI-D
|
fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz
525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible
with non-interlaced signals only |
| Scanning frequency | RGB
|
fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz |
| Scanning frequency | YPBPR (YCBCR)
|
525i (480i): fH 15.73 kHz; fV 59.9 Hz,
625i (576i): fH 15.63 kHz; fV 59.9 Hz,
525p (480p): fH 31.50 kHz; fV 60 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz |
| Scanning frequency | Video/S-Video
|
fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Optical axis shift
|
Vertical: +50%, -16%(powered),
Horizontal: +30%, -10% (When using the ET-DLE085/ET-DLE105, +28%, -10%) (powered)
NOTE: Optical a xis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed. |
| Installation
|
Ceiling/floor, front/rear, 360 degree free installation |
| Terminals | SDI IN
|
BNC x 1,
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant |
| Terminals | HDMI IN
|
HDMI 19-pin x 1, Deep Color, compatible with HDCP |
| Terminals | DVI-D IN
|
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only |
| Terminals | RGB 1 IN
|
BNC x 5 |
| Terminals | RGB 1 IN | R, G, B
|
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
| Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR)
|
Y:1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals | RGB 1 IN | Y/C
|
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| Terminals | RGB 1 IN | Video
|
1.0Vp-p, 75 ohms |
| Terminals | RGB 2 IN
|
D-sub HD 15-pin (female) x 1 |
| Terminals | RGB 2 IN | R, G, B
|
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic |
| Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR)
|
Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals | SERIAL/MULTI PROJECTOR SYNC IN
|
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL/MULTI PROJECTOR SYNC OUT
|
D-sub 9-pin (male) x 1 for link control |
| Terminals | Remoter 1 In
|
M3 jack x 1 for wired remote control |
| Terminals | Remoter 1 Out
|
M3 jack x 1 for link control (for wired remote control) |
| Terminals | Remoter 2 In
|
D-sub 9-pin (female) x1 for external control (parallel) |
| Terminals | LAN/DIGITAL LINK
|
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP |
| Power cord length
|
3.0 m (9 ft 10 in) |
| Cabinet materials
|
Molded plastic |
| Dimensions (W x H x D) | PT-RZ660B/RZ660W
|
498 x 200*5 x 581mm
(19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens |
| Dimensions (W x H x D) | PT-RZ660LB/RZ660LW
|
498 x 200*5 x 538 mm
(19-19/32 x 7-7/8*5 x 21-3/16in) without lens |
| Weight | PT-RZ660B/RZ660W
|
Approx. 23.1kg (50.9lbs) with supplied lens |
| Weight | PT-RZ660LB/RZ660LW
|
Approx. 22.3kg (49.2lbs) without lens |
| Operation noise
|
35 dB |
| Operating temperature
|
0-45 °C (32-113 °F) * 6 |
| Operating humidity
|
10%-80% (no condensation) |
| Note
|
*1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate.
*2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by
the ISO/IEC 21118:2012 international standards.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*5 with legs at shortest position.
*6 Limits the luminance when used in locations from 0m to 2,700m (0ft to 8858ft) above sea level at ambient temperatures of 35°C (95°F) or higher,
or from 2,700m to 4,200m (8,858ft to 13,780ft) above sea level at ambient temperatures of 25°C (77°F) or higher. |
| Brightness
|
6,200 lumens (Center)/ 6,000 lumens |
| Technology
|
1-Chip DLP Laser |
| DLP™ chip | Display method
|
DLP™ chip x 1, DLP™ system |
| DLP™ chip | Pixels
|
2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels |
| DLP™ chip | Panel size
|
17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
