PT-MW530U 3LCD SOLID SHINE Laser Projector

New
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

PT-MW530

Product details

Flexible and cost-efficient Solid Shine laser projector Designed for single-screen projection and equipped with advanced collaboration technologies for education and corporate use. Digital Link - Optional wireless functions 5 Ghz - 360° flexible installation.

Key features
  • Laser LCD, 5 500 lumens, WXGA
  • Compact and lightweight body, designed with ultra-low noise operation (28dB)
  • Exchangeable lenses (compatible with PT-EZ770 series lenses) for flexible installation in any meeting- or classroom
  • Packed with a wide range of collaboration technologies such as 5 Ghz wireless projection from multiple devices, secure streaming & networking, PC-less presentation, audio loop-through and others
  • Long lasting laser light source and low-maintenance design provide high brightness and superb image quality
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • Thumbnail
View Product Support

Chat with Sales

Brightness 5 500 lumens
Technology Laser LCD
Power supply AC 100-240 V, 50/60 Hz
Power consumption *1 415W
(during standby)
Approx. 0.5 W (When [STANDBY MODE] is set to [ECO])
Approx. 22 W (When [STANDBY MODE] is set to [NORMAL])
Approx. 47 W(When [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON], maximum audio is output, and USB memory is inserted in the terminal)
Approx. 115 W(When [QUICK STARTUP] is set to [ON], [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON], maximum audio is output, and the power is supplied from the terminal)
BTU value Max 1,416BTU
LCD panel | Panel size 19.3 mm (0.76 inches) diagonal (16:10 aspect ratio)
LCD panel | Display method Transparent LCD panel (x 3, R/G/B)
LCD panel | Drive method Active matrix method
LCD panel | Pixels 1,024,000 (1280 x 800) x 3, total of 3,072,000 pixels
Lens | PT-MW630 Powered zoom ( 1.6x), focus lenses, F 1.7- 2.3, f 26.8- 45.5 mm
Throw ratio 1.6-2.8:1
Lens | PT-MW630L Optional powered zoom/focus lenses and fixed-focus lens
Light source Laser Diode Laser class 1(Class3R for US models )
Illumination life of set Varies depending on operation mode setting.
20,000 hours at half luminance
* IEC62087: 2008 Broadcast contents, Dynamic contrast [2],
Temperature: 30°C (86F), Under conditions of 0.15 mg/m3 of particulate matter
Projection size 1.02?10.16 m (40?400 inches) diagonally, 16:10 a spect ratio
Colors Full color ( 16,777,216 colors)
Light output *1 6,500 lumens (Input signals: PC, Operating mode: Normal, Dynamic mode)
Center-to-corner uniformity 90%
Contrast Ratio *1 3,000,000:1(all white/all black)(Dynamic Contrast 1 or 2 )
(Input signals: PC, Operating mode: Normal, Dynamic mode)
Resolution WXGA 1280 x 800 pixels
Scanning frequency | RGB fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 162 MHz or less
Scanning frequency | YPBPR(YCBCR) 480i (525i): fH 15.73 kHz; fV 59.94 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.47 kHz; fV 59.94 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080 (1125)/25p: fH 28.13 kHz; fV 25 Hz,
1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
1080 (1125)/24sF: fH 27.00 kHz; fV 48 Hz,
1080 (1125)/30p: fH 33.75 kHz; fV 30 Hz,
1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency | Video fH: 15.73 kHz / 15.63 kHz fV: 59.94 Hz / 50 Hz
[NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM]
Scanning frequency | HDMI/DIGITAL LINK ・Moving image signal resolution:
480i ( 525i)*2, 576i ( 625i)*2, 480p ( 525p), 576p ( 625p), 720 (750)/60p,
720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p,
1080 ( 1125)/24p, 1080 ( 1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p,
1080 ( 1125)/50p
Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
・Dot clock frequency: 25 MHz to 162 MHz
Optical axis shift Vertical ±67%, Horizontal ±35% (Supplied lens/ET-ELS20/ET-ELW20/ET-ELT20/ET-ELT21)
Vertical ±60%, Horizontal ±30% (ET-ELW22)
NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.
Installation Ceiling/desk/AUTO, front/rear, 360 degree free installation
Speaker 4.0 cm round-type x 1
Maximum usable volume output 10 W (monaural)
Terminals | HDMI 1 IN HDMI 19 pin, HDCP and Deep color compatible
Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
Terminals | HDMI 2 IN HDMI 19 pin, HDCP and Deep color compatible
Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
Terminals | RGB 1 IN BNC (female) x 5, RGB/Y PB/PR (CB/CR)
Terminals | RGB 2 IN D-Sub 15 p (female) x 1, RGB/Y PB/PR (CB/CR)
Terminals | MONITOR OUT D-Sub 15 p (female) x 1, RGB/Y PB/PR (CB/CR)
Terminals | VIDEO IN Pin jack x 1
Terminals | AUDIO IN 1 M3 stereo jack x 1(L-R)
Terminals | AUDIO IN 2 M3 stereo jack x 1(L-R)
Terminals | AUDIO IN 3 Pin jack x 2(L-R)
Terminals | VARIABLE AUDIO OUT M3 jack, 0 V[rms] to 2.0 V[rms] variable, output imedance 2.2 k ohms and less
Terminals | SERIAL IN D-sub 9 pin, RS-232C compliant, for computer control use
Terminals | REMOTE 1 D-Sub 9 p (female) x 1, for external control (parallel)
Terminals | REMOTE 2 M3 jack x 1(L-R) for link control (for wired remote control)
Terminals | LAN RJ-45 x 1 for network connection, 10/100Base-TX, compliant with PJLink™(Class 2)
Terminals | DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™(Class 2), Deep Color, HDCP
Terminals | VIEWER / PAIRING USB type-A x 1
Terminals | DC OUT USB type-A x 1(DC 5V, 2A(Max) )
Power cord length 3.0m(9ft 10in)
Cabinet materials Molded plastic
Dimensions (W x H x D) PT-MW530
560 x 205*4 x 443mm (22-1/16 x 8-1/16*4 x 17-7/16inches) (with supplied lens)
PT-MW530L
560 x 205*4 x 428mm (22-1/16 x 8-1/16*4 x 16-27/32inches) (without lens)
Weight *5
PT-MW530
Approx. 16.9 kg (37.3 lbs) (with supplied lens)
PT-MW530L
Approx. 16.1 kg (35.5 lbs) (without lens)
Noise level *1 32dB (Operating mode: NORMAL/ECO), 26dB (Operating mode: QUIET)
Operating environment | Temperature 0°C (32°F) to 45°C (113°F)
The projector cannot be used at an altitude of 2,700 m (8,858') or higher above sea level.
The light output may decrease to protect the projector when the operating environment temperature exceeds 36 °C (96.8 °F).
Operating environment | Humidity 20% to 80% (no condensation)
Note Weights a nd dimensions shown are approximate. Speci cations subject t o change w ithout notice.
*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) for 480i(525i) and 576i(625i)
*3 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55° .
*4 When adjustable feet shortened.
*5 Average value. May differ depending on models.
*6 Can be used when the ET-WM300 (option) is installed.
*7 When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.: ET-PKD120H (for High Ceilings) or ET-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector Mount Bracket)), it is necessary to replace the drop- prevention wire rope with the one corresponding to this projector. Consult your dealer. Drop-prevention set (service model no.: DPPW1004Z A/X1)
*8 The suffix of the Model No. differs according to the license type.