PT-EW730ZU 3LCD Fixed Installation Projector

 

PT-EW730Z

Product details

High brightness, low TCO and flexible installation LCD Projector Ideal for use in education and corporate environments

Key features
  • LCD, 7000 lumens, WXGA
  • Daylight View Basic function ensures clear and vivid image quality in bright environments
  • Integrated DIGITAL LINK and Displayport connection
  • Eco filter enables up to 15000 hours of air filter replacement cycle
  • Thumbnail
Brightness 7,000 lumens (LAMP POWER: AUTO/NORMAL, Dynamic mode, Standard lens)
Resolution 1,280 x 800 pixels
Power supply 100-240 V AC, 50/60 Hz
Power consumption 575 W (0.3 W with STANDBY MODE set to ECO, 10 W with STANDBY MODE set to NORMAL, 37 W with in STANDBY MODE of Audio Setting set to on.)
Optical system Dichroic mirror separation/prism synthesis system
LCD panel Panel size 19.0 mm (0.75 inches) diagonal (16:10 aspect ratio)
LCD panel Display method Transparent LCD panel (x 3, R/G/B)
LCD panel Pixels 1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels
LCD panel Pixel configuration Stripe
LENS Powered zoom/focus lens (1.7-2.8:1), F 1.7-2.3, f 26.9-45.4 mm Optional powered zoom/focus lenses and fixed-focus lens
Lamp 400 W UHM lamp
Screen size 1.02 - 10.16 m (40 - 400 inches), 16:10 aspect ratio (1.52 - 10.16 m (60 - 400 inches) with the ET-ELW22 (16:10 aspect ratio))
Center-to-corner uniformity 90%
Contrast 5,000:1 (full on/full off, LAMP POWER: AUTO, Iris on, Dynamic mode)
Scanning Frequency (Display Port/HDMI/DVI-D) fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25 MHz-162 MHz (VGA: 640 x 480 pixels to WUXGA: 1,920 x 1,200 pixels, VESA CVT-RB compliant, compatible with HDCP)
Scanning Frequency (RGB) fH: 15-100 kHz, fV: 24-120 Hz, dot clock: up to 162 MHz
Scanning frequency YPBPR (YCBCR) 480i(525i): fH 15.73 kHz; fV 59.94 Hz, 576i(625i): fH 15.63 kHz; fV 50 Hz, 480p(525p): fH 31.47 kHz; fV 59.94 Hz, 576p(625p): fH 31.25 kHz; fV 50 Hz, 720(750)/60p: fH 45.00 kHz; fV 60 Hz, 720(750)/50p: fH 37.50 kHz; fV 50 Hz, 1080(1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080(1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080(1125)/25p: fH 28.13 kHz; fV 25 Hz, 1080(1125)/24p: fH 27.00 kHz; fV 24 Hz, 1080(1125)/24sF: fH 27.00 kHz; fV 48 Hz, 1080(1125)/30p: fH 33.75 kHz; fV 30 Hz, 1080(1125)/60p: fH 67.50 kHz; fV 60 Hz, 1080(1125)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video/YC) fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: ±60% (±50% with the ET-ELW22.) (powered), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.
Keystone correction range Vertical: ±40° (with vertical correction only) Horizontal: ±30° (with horizontal correction only)
Installation Ceiling/floor, front/rear
Built-in Speaker Size 3.7 cm (1-15/32 inches) (round) x 1
Built-in Speaker Output power 10 W (monaural)
Terminals Display Port In DP-20P x 1, HDCP compatible; 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p; VGA(640 x 400) - WUXGA(1,920 x 1,200); Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals HDMI IN HDMI 19-pin x 1, Deep Color, HDCP compatible; 480i(525i), 576i(625i), 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p; VGA(640 x 400) - WUXGA(1,920 x 1,200); Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz,32 kHz)
Terminals DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, compatible with single link only 480i(525i), 576i(625i), 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p; VGA(640 x 400) - WUXGA(1,920 x 1,200)
Terminals RGB 1 IN D-sub HD 15-pin (female) x 1
Terminals RGB 1 IN R, G, B R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)
Terminals RGB 1 In Y, PB (CB), PR (CR) Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 2 IN BNC x 5 (RGB/YPBPR/YCBCR x 1)
Terminals RGB 2 IN R, G, B R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms ; HD/VD, SYNC: high impedance, TTL (positive/negative); NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB2 IN Y, PB (CB), PR (CR) Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
Terminals RGB 2 In S-Video In Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
Terminals VIDEO IN PIN Jack x 1, 1.0 Vp-p, 75 ohms
Terminals MONITOR OUT D-sub HD 15-pin (female) x 1 R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)
Terminals Monitor Out Y, PB (CB), PR (CR) Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
Terminals AUDIO IN M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more; M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more; PIN Jack (L, R) x 2, 0.5 Vrms, input impedance: 22 kilohms or more
Terminals VARIABLE AUDIO OUT M3 (L, R) x 1 (monitor out: 0 - 2.0 Vrms, variable)
Terminals SERIAL IN D-sub 9-pin (female) x 1, for external control (RS-232C compliant)
Terminals Remoter 1 In M3 jack x 1 for wired remote control
Terminals Remoter 2 In D-sub 9-pin (female) x 1, for external control (parallel)
Terminals LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 480i(525i), 576i(625i), 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p; VGA(640 x 400) - WUXGA(1,920 x 1,200), dot clock: 25 MHz-162 MHz; NOTE: Compatible with non-interlaced signals only.
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) PT-EZ730Z 530 x 177 x 445 mm (20-7/8 x 6-31/32 x 17-17/32 inches) (with supplied lens)
Dimensions (W x H x D) PT-EZ730ZL 530 x 177 x 385 mm (20-7/8 x 6-31/32 x 15-5/32 inches) (without lens)
Weight PT-EZ730Z Approx. 10.6 kg (23.4 lbs) (with supplied lens)
Weight PT-EZ730ZL Approx. 9.8 kg (21.6 lbs) (without lens)
Operation noise 37 dB (LAMP POWER: NORMAL), 31 dB (LAMP POWER: ECO 1), 29 dB (LAMP POWER: ECO 2)
Operating temperature 0℃ - 45℃ (32℉ - 113℉)
Operating humidity 10% - 80% (no condensation)
Technology LCD Projector

Unmatched Image Quality

The new sleek and compact PT-EW730ZU LCD projector with WXGA resolution (1,280 X 800) produces a brightness of up to 7,500 lumens. The iris automatically adjusts itself to match the situation, resulting in a high contrast ratio of 5,000:1, The PT-EW730ZU offers a versatile solution for numerous applications including university lecture rooms, engineering or art classes, and large company meeting rooms. 

The PT-EW730ZU features the highly durable optical engine with inorganic LCD panels and polarizers providing up to 10,000 hours of service without maintenance. The PT-EW730ZU offers low maintenance with the dust-resistant cabinet design and a washable Eco filter that needs no replacement for up to 15,000 hours. The PT-EW730ZU offers a long lamp replacement cycle of up to 4,500 hours. With the lamp power set to Auto, the intelligent lamp control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 70%. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp out put drops, resulting a reduction in power consumption while excellent color reproduction is maintained.