Sorry, you need to enable JavaScript to visit this website.

AK-HCU200 Rack-Mountable Camera Control Unit

  • Live Chat
  • Contact us


Product details

The camera control unit AK-HCU200E allows a high-quality, long-distance optical fibre transmission camera system to be configured at low cost. The optical fibre transmission is supporting uncompressed video signals over a distance of approximately 1.000 m between the camera and camera control unit.  The compact, lightweight unit measures 2U in height and is rack-mountable. Additionally the AK-HCU200E has a built-in cross converter supporting 720p/59,94 and 720p/50. 

Key features

  • Optical fiber transmission
  • IP Protocol
  • Cost effective
View Product Support

Live Chat

Specification Description
Weight Approx. 6.6 kg (approx. 14.6 lb)
Dimensions (W x H x D) 424 mm x 88 mm x 400 mm
(16-11/16 inches x 3-7/16 inches x 15-3/4 inches)
Excluding protrusions
Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Power supply 100 V to 240 V AC, 50Hz/60 Hz
Power consumption 170 W (Without CAMERA connected: 32 W)
Operating humidity 10 % to 90 % (no condensation)
Reference input 1 line (1 loop-through line)
Black burst/tri-level*3
VIDEO OUTPUT HD-SDI/SD-SDI: 4 lines (2 lines shared with picture monitor output*1)
Analog composite: 1 line (1 line shared with picture monitor output*1)
Output Format 1080/59.94i, 1080/50i, 1080/29.97PsF*2, 1080/25PsF*2, 1080/23.98PsF*2, 720/59.94p, 720/50p
Communication Intercom input/output: 2 lines (1/2*1)
(0 dBm, 600 Ω, RTS/4W*1)
PGM: 1 line, input (0 dBm/600 Ω)
Tally input: Red, Green, 1 input each
Return Input HD-SDI/SD-SDI: 2 lines (switched depending on the setting) VBS: 1 line
Prompter Input 1 line, Analog composite
Intercom XLR, 5-pin, female
Input: –55 dBu to –10 dBu
Output: 100 mW (max.)
LAN Port 1 line (8-pin, RJ45)
Note *1: Depending on the setting, only one of them can be selected at one time.
*2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF formats must be selected at the camera.
*3: The black burst signal and tri-level sync signal of the reference input are recognized automatically.
Capacity for Supplying Power to a Camera 190 V DC, 0.6 A
Microphone Output 2 lines (XLR, 3-pin, male), 0 dBm/600 Ω
ROP interface RS-422, 1 line, 12 V output
MSU interface RS-422, 1 line, GPI for control

AK-HRP200 Remote Operation Panel


AK-HC3800 2/3" HD Broadcast Camera