Sorry, you need to enable JavaScript to visit this website.

Product details

Ensure high-level error proofing while improving productivity and quality control on your assembly line. Panasonic Multi-Tool and Single-Tool assembly controllers provide expansion capability so you can program up to 16 power tools, simultaneously or sequentially with EYFR03 and EYFR04 series. Gain the versatility your production process demands. Deliver advanced error-proofing, quality control and increased productivity for any assembly line while eliminate assembly errors for good.

Key features

  • 1, 2 & 16 Tool versions available
  • Error proofing with multiple Panasonic wireless programmable tools
  • Program up to 16 Panasonic tools simultaneously or sequentially with 2-way communication
  • Multi communication protocols included for data collection: Open Protocol, Ethernet IP, Toolsnet, ProfiNet, Digital I/O, PFCS
  • Operator visual and audio feedback
  • Secure 802.15.4 wireless communication with a range of up to 33 ft (10m)
  • All controllers have networking capability
  • Enable/Disable tools
  • Torque & Angle Data Collection
  • 2-way communication allows for parameter selection from controller

*Previous Controller Firmwares

*If controller is running v4.1.0 or older you must install v4.1.0 before you can install v4.4.0.  See "Previous Controller Firmware"
*If controller is running v1.4.0 or older you must install v1.5.2 before you can install v1.8.0.  See "Previous Controller Firmware"


Graphics Display -
Multiple Interfaces - -
Number of Tool Connectivity 1 (Option to upgrade to 2 tools with additional fee) 2 16
Number of Tools Simultaneously 1 (Option to upgrade to 2 tools with additional fee) 2 16 4
Tool Sequencing 16 4
2-Way Radio Communication
Recommended Wireless Range 33' (10M)
Discrete Inputs/Outputs 2/4 8/12 - 8/12
I/O Voltage & Amps 2A @ 24V
USB Ports
Ethernet Ports 1 2
Serial Port - 1
Ethernet IP & Open Protocol & ToolsNet
Profinet, PFCS, Serial Open Protocol -
Data Collection 2,500 rundowns onboard or via Ethernet 10,000 rundowns onboard or via Ethernet 5,000 rundowns per station onboard or via Ethernet
Serial Barcode Capability -
USB Barcode Capability -
Dimensions (L x W x H) 9-1/16" x 14-1/8" x 3-1/2" 10-1/4" x 10-3/4" x 4-1/4"
Operating Temperature 14-140°F (-10-60°C)
Compatible Tools All Panasonic Radio Tools will have an "R" in the serial # and model # (Compatible with HS-Technik tools with Panasonic Communication Module)

Additional models