| Specification |
Description |
| Power supply
|
AC 120 V, 50/60 Hz (North America),
AC 100-240 V, 50/60 Hz (other countries) |
| Power consumption
|
372 W (North America),
378 W (other countries)
0.2 W when STANDBY MODE set to ECO*1(North America),
0.4 W when STANDBY MODE set to ECO*1(other countries)
8 W when STANDBY MODE set to NORMAL
(20 W at rated audio output.) |
| LCD panel | Panel size
|
16.3 mm (0.64 inches) diagonal (16:10 aspect ratio) |
| LCD panel | Display method
|
Transparent LCD panel (x 3, R/G/B) |
| LCD panel | Drive method
|
Active matrix method |
| LCD panel | Pixels
|
2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels |
| LENS
|
Manual zoom (1.6x), manual focus,
F 1.60-2.12, f 15.30 - 24.64 mm |
| Throw ratio
|
1.1-1.8:1 |
| Lamp
|
270 W UHM lamp |
| Screen size
|
0.76-7.62 m (30-300 inches) diagonally, 16:10 aspect ratio |
| Colors
|
Full color (16,777,216 colors) |
| Brightness*2
|
4,400 lumens
(Input signals: PC, Lamp power: Normal, Picture mode: Dynamic) |
| Center-to-corner uniformity*2
|
85% |
| Contrast*2
|
1,0000:1 (full on/off, Input signals: PC, Lamp power: Normal,
Picture mode: Dynamic, Iris: on) |
| Resolution
|
WUXGA 1,920 x 1,200 pixels |
| Scanning frequency | HDMI
|
480i (525i)*3, 576i (625i)*3, 480p (525p), 576p (625p), 720 (750)/60p,
720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p,
1080 (1125)/24p, 1080 (1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p,
1080 (1125)/50p
640 x 480 - 1920 x 1200 (non-interlace)
dot clock: 25- 162 MHz, HDCP compatible |
| Scanning frequency | RGB
|
fH: 15 - 91 kHz, f V: 24 - 100 Hz, dot clock: 162 MHz or lower |
| Scanning frequency | YPBPR (YCBCR)
|
480i (525i): fH 15.73 kHz; fV 59.94 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.47 kHz; fV 59.94 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080 (1125)/25p: fH 28.13 kHz; fV 25 Hz,
1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
1080 (1125)/24sF: fH 27.00 kHz; fV 48 Hz,
1080 (1125)/30p: fH 33.75 kHz; fV 30 Hz,
1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz |
| Scanning frequency | Video/S-Video
|
fH: 15.73 kHz/15.63 kHz, fV: 59.94 Hz/50 Hz
[NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM] |
| Optical axis shift
|
Vertical 0 - +44% from center of screen (manual), U/D ratio on top end: 17:1 |
| Keystone correction range
|
Vertical: maximum ±25° (auto/manual, input: WUXGA),
Horizontal: maximum ±30° (manual, input: WUXGA) |
| Installation
|
Ceiling/desk, front/rear |
| Built-in speaker | Size
|
4 cm (1-9/16 inches) (round) x 1 |
| Built-in speaker | Output power
|
10 W (monaural) |
| Terminals | HDMI IN
|
HDMI 19-pin x 2, Deep Color, HDCP compatible
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz) |
| Terminals | COMPUTER 1 IN
|
D-sub HD 15-pin (female) x 1 |
| Terminals | COMPUTER 1 IN | R, G, B
|
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible |
| Terminals | COMPUTER 1 IN | Y, PB (CB), PR (CR)
|
Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms |
| Terminals | COMPUTER 1 IN | S-VIDEO
|
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| Terminals | Computer 2 IN/1 OUT
|
D-sub HD 15-pin (female) x 1, (input/output switching) |
| Terminals | Computer 2 In/1 Out | R, G, B
|
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible |
| Terminals | Computer 2 In/1 Out | Y, PB (CB), PR (CR)
|
Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms |
| Terminals | VIDEO IN
|
Pin jack x 1, 1.0 Vp-p, 75 ohms |
| Terminals | AUDIO IN 1
|
M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more |
| Terminals | Audio In 2/MIC In
|
M3 (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more |
| Terminals | AUDIO IN 3
|
Pin jack (L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more |
| Terminals | AUDIO OUT
|
M3 (L, R) x 1 (monitor out, stereo)
0-2.0 Vrms, variable, output impedance: 22 kilohms or less |
| Terminals | SERIAL IN
|
D-sub 9-pin (female) x 1, for external control (RS-232C compliant) |
| Terminals | LAN
|
RJ-45 x 1, for network connection, 100BASE-TX / 10BASE-TX,
compliant with PJLink™) |
| Power cord length
|
2.0 m* (6 ft 7 in)
*PT-VZ470D(for India) : 3.0 m (9 ft 10 in) |
| Cabinet materials
|
Molded plastic |
| Dimensions (W x H x D)
|
389 x 125*4 x 332* 5 mm
(15-5/16 x 4-29/32*4 x 13-1/16* 5 inches) |
| Weight
|
Approx. 4.8 kg (10.6 lbs) |
| Operating temperature
|
0-40 |
| Operating humidity
|
20%-80% (no condensation) |
| Note
|
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate. Also, only certain
commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
*4 With legs at shortest position.
*5 Include protruding parts.
*6 Average value. May differ depending on models. |
| Operation noise*2
|
37 dB (LAMP POWER: NORMAL), 29 dB (LAMP POWER: ECO) |
| Brightness
|
4400 lumens |
| Technology
|
WUXGA |
