PT-EX16KU 3LCD Large Venue Projector

 
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

PT-EX16K

Product details

Reliable high brightness LCD projector Designed for events and staging applications

Key features
  • LCD, 16000 lumens, XGA
  • Rich colour reproduction and brightness with the Pure Colour Control technology
  • Quad lamp system for high reliable long usage
  • Various optional lenses for flexible installation.
  • Thumbnail
View Product Support

Chat with Sales

Power supply 200-240 V AC, 11 A, 50/60 Hz (3-wire single-phase); NOTE: The projector should be connected to an independent circuit. Please consult your electrician for more details.
Power consumption 1,850 W (18 W with standby mode)
LCD panel Panel size 46 mm (1.8 inches) diagonal (4:3 aspect ratio)
LCD panel Display method Transparent LCD panel (x 3, R/G/B)
LCD panel Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
LCD panel Pixel configuration Stripe
Pure color control device x 1
LENS Optional powered zoom/focus lenses
Lamp 380 W UHM lamp x 4
Screen size 1.02-15.24 m (40 - 600 inches) diagonally, 4:3 aspect ratio (2.54-15.24 m (100 - 600 inches) with the ET-ELS03, 4:3 aspect ratio)
Brightness 16,000 lumens (four lamp, normal/auto mode, with ET-ELS03)
Center-to-corner uniformity 90%
Contrast 2,500:1 (full on/full off, four lamp, auto mode, with ET-ELS03)
Resolution 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
Scanning Frequency (HDMI/DVI-I) fH: 26 kHz - 80 kHz, fV: 23 Hz -85 Hz, dot clock: 162 MHz or lower
Scanning Frequency (RGB) fH: 15 kHz -120 kHz, fV: 48 Hz -120 Hz, dot clock: 230 MHz or lower
Scanning frequency YPBPR (YCBCR) 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/25sF: fH 28.13 kHz; fV 50 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/30sF: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video/S-Video) fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Powered
Optical axis shift ET-ELW06 Vertical: ±39% from center of screen
Optical axis shift ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03 Vertical: ±39% from center of screen, Horizontal: ±10% from center of screen
Optical axis shift ET-ELS02 Vertical: ±50% from center of screen, Horizontal: ±10% from center of screen
Keystone correction range Vertical: ±40° (ET-ELS03, with vertical correction only) Horizontal: ±40° (ET-ELS03, with horizontal correction only)
Installation Ceiling/desk, front/rear
Terminals INPUT 1 Menu selection
Terminals INPUT 1 HDMI IN HDMI 19-pin x 1, Deep Color, HDCP compatible; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1035/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/25sF, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/30psf, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200)
Terminals INPUT 1 DVI-D IN DVI-D 29-pin x 1, DVI 1.0 compliant, compatible with HDCP, compatible with single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1035/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/25sF, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/30sF, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200)
Terminals INPUT 1 RGB IN D-sub HD 15-pin (female) x 1
Terminals INPUT 1 RGB IN R, G, B G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B, R: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative); NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals INPUT 2 Menu selection
Terminals INPUT 2 RGB IN BNC x 5 (RGB/YPBPR/YCBCR x 1)
Terminals INPUT 2 RGB IN R, G, B G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B, R: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative); NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals Input 2 RGB In Y, PB (CB), PR (CR) Y: 1.0 Vp-p (including sync signal); PB(CB), PR(CR): 0.7 Vp-p, 75 ohms
Terminals INPUT 2 VIDEO IN BNC x 1, 1.0 Vp-p, 75 ohms
Terminals S-VIDEO IN Mini DIN 4-pin x 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
Terminals SERIAL IN D-sub 9-pin x 1, for external control (RS-232C compliant)
Terminals SERIAL OUT D-sub 9-pin x 1, for for link control
Terminals Remoter 1 In M3 jack x 1 for wired remote control
Terminals LAN RJ-45 x 1, for network connection, 100Base-TX/10Base-T, compliant with PJLink™
Terminals USB USB type-B (USB connector) x 1
Optional board slot x 2 (INPUT 3/4)
Optional board slot With ET-MD16SD1 installed SERIAL IN (SDI IN 1/2) BNC x 2; SD-SDI signal (YCBCR 4:2:2 10-bit), SMPTE 259M-C compliant: 480i, 576i; Single-link HD-SDI signal (YPBPR 4:2:2 10-bit), SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,1080/60i, 1080/25p, 1080/25sF, 1080/24p, 1080/24sF, 1080/30p, 1080/30sF
Optional board slot With ET-MD16SD1 installed SERIAL OUT (SDI OUT) BNC x 1, active through
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic (PC + ABS)
Dimensions (W x H x D) 650 mm x 349 mm x 815 mm (25-19/32 x 13-3/4 x 32-3/32 inches) (without lens)
Weight Approximately 46.5 kg (102.5 lbs) (without lens)
Operation noise 51 dB (lamp power: normal /eco 2), 48 dB (lamp power: eco 1)
Operating temperature 5℃ - 40℃ (4℉ - 104℉)
Operating humidity 20% - 80% (no condensation)
Technology LCD
<sup>(1)</sup> Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.<br/>
<sup>(2)</sup> Maximum physical resolution. Quad Pixel Drive: ON.<br/>
<sup>(3)</sup> Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.<br/>
<sup>(4)</sup> With lens other than ET-D75LE95 and power supply of AC 200 V.