| Specification |
Description |
| Brightness
|
8,800 lm (Center)*1 / 8,500lm*2 |
| Resolution
|
WUXGA |
| Technology
|
Laser 1-chip DLP |
| Resolution
|
1920 x 1200 pixels |
| DLP™ chip | Panel size (mm)
|
17.0 mm diagonal (16:10 aspect ratio) |
| DLP™ chip | Panel size (inch)
|
0.67 inch diagonal (16:10 aspect ratio) |
| DLP™ chip | Display method
|
DLP™ chip x 1, DLP™ projection system |
| DLP™ chip | Pixels
|
2,304,000 (1920 x 1200) pixels |
| LENS
|
PT-RZ870: Powered zoom (throw ratio 1.7-2.4:1), powered focus F 1.7-1.9, f 25.6-35.7 mm
PT-RZ870L: Optional powered zoom/focus lenses |
| Light source
|
Laser diodes laser Class 1 (Class 3R for US models) |
| Screen size (diagonal) (mm)
|
1.27-15.24 m, 1.27-5.08 m with ET-DLE055, 2.54-8.89 m with ET-DLE030, 16:10 aspect ratio |
| Screen size (diagonal) (inch)
|
50-600 inch, 50-200 inch with ET-DLE055, 100-350 inch with ET-DLE030, 16:10 aspect ratio |
| Resolution
|
1920 x 1200 pixels |
| Keystone correction range
|
Vertical: ±40° (±16° with ET-DLE060, ±22° with ET-DLE085/DLE055/DLE105, +5° with ET-DLE030),
Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE030) |
| Keystone correction range with optional Upgrade Kit ET-UK20
|
Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/DLE250 / supplied lens, ±22° with ET-DLE085/DLE055/DLE105),
Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE085/DLE055),
When verival and horizontal keystone are used simultaneously, correction cannot be made exceeding total of 55° . |
| Installation
|
Ceiling/floor, front/rear, free 360-degree installation |
| Terminals | SDI IN
|
BNC x 1: 3G/HD/SD-SDI input |
| Terminals | HDMI IN
|
HDMI 19-pin x 1 (Compatible with HDCP, Deep Color) |
| Terminals | DVI-D IN
|
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| Terminals | RGB 1 IN
|
RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR/YC/VIDEO |
| Terminals | RGB 2 IN
|
D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR |
| Terminals | SERIAL IN
|
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL OUT
|
D-sub 9-pin (male) x 1 for link control |
| Terminals | REMOTE 1 IN
|
M3 x 1 for wired remote control |
| Terminals | REMOTE 1 OUT
|
M3 x 1 for link control (for wired remote control) |
| Terminals | REMOTE 2 IN
|
D-sub 9-pin (female) x 1 for external control (parallel) |
| Terminals | LAN/DIGITAL LINK
|
RJ-45 x 1 for network and DIGITAL LINK connection, 100Base-TX, compatible with PJLink™, HDCP, Deep Color |
| Power supply
|
AC 100-240 V, 50/60 Hz |
| Power consumption
|
950 W |
| Cabinet materials
|
Molded plastic |
| Dimensions (W x H x D) (mm)
|
PT-RZ870: 498 x 200*5 x 581 mm (with supplied lens)
PT-RZ870L: 498 x 200*5 x 538 mm (without lens) |
| Dimensions (W x H x D) (inch)
|
PT-RZ870: 19 19/32 x 7 7/8 *5 x 22 7/8 inch (with supplied lens)
PT-RZ870L: 19 19/32 x 7 7/8 *5 x 21 3/16 inch (without lens) |
| Weight (kg)*4
|
PT-RZ870: Approx. 23.2 kg (with supplied lens)
PT-RZ870L: Approx. 22.4 kg (without lens) |
| Weight (lbs.)*4
|
PT-RZ870: Approx.51.1 lbs. (with supplied lens)
PT-RZ870L: Approx. 49.4 lbs. (without lens) |
| Operating environment (℃/M)
|
Operating temperature: 0-45 °C *6, operating humidity: 10-80 % (no condensation) |
| Operating environment (°F/Feet)
|
Operating temperature: 32-113 °F *6, operating humidity: 10-80 % (no condensation) |
| Applicable software/application
|
Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro |
| Note
|
Note: PT-RZ870L offer the same performance as PT- RZ870 respectively, but come without a lens.
*1 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*2 Luminance measured at center of screem.
*3 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE030.
*4 Average value. May deffer depending on the actual unit.
*5 With legs at shortest position.
*6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperature becomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the projector. |
| Optical axis shift | Vertical (from center of screen)
|
+50 %, -16 % (+40%, -16% with ET-DLE060) (powered)*3 |
| Optical axis shift | Horizontal (from center of screen)
|
+30 %, -10 % (+19 %, -10 % with ET-DLE060 / +28 %, -10 % with ET-DLE085/DLE105) (powered)*3 |
| Center-to-corner uniformity*2
|
90 % |
| Operation noise*2
|
41 dB (NORMAL) / 37 dB (QUIET1) / 35 dB (QUIET2) |
| Contrast*2
|
10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
