Sorry, you need to enable JavaScript to visit this website.

PT-MZ16KU 3LCD SOLID SHINE Laser Projector Discontinued

  • Chat with Sales
  • Contact us

PT-MZ16KL

Product details

Designed to reduce the AV managers workload in businesses and universities.

Key features

  • Laser 3LCD, 16,000 lumens, WUXGA
  • Silent (38dB in normal mode) and light construction (22kg) is ideal for lecture theatres and seminar rooms
  • 20 000 hours maintenance-free operation due to the dustproof construction and long-lasting eco filter
  • Triple drive engine ensures non-stop operation with a failover function. A secondary backup signal input and the  monitoring function reduce the impact of potential technical faults.
  • Flexible installation with a choice of seven optional zoom lenses . Easy setup with Geo Pro software and DIGITAL LINK function
  • Digital Link
  • Solid Shine Laser
  • Geo Pro
  • 360-Degree Free Installation
  • 4K signal input
View Product Support

Chat with Sales

Specification Description
Projector type LCD projectors
Light source Laser diodes
Light output*1 16,000 lm
Time until light output declines to 50 %*2 20,000 hours (NORMAL)
Resolution 1920 x 1200 pixels
LENS Optional powered zoom lenses
Lens shift | Vertical (from center of screen) ±60 % (±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)
Lens shift | Horizontal (from center of screen) ±20 % (±19 % with ET-EMW200) (powered)
Keystone correction range Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500), Horizontal: ±15° (±8° with ET-EMW200/ET-EMW300)
Keystone correction range with optional ET-UK20 Upgrade Kit Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500), Horizontal: ±40° (±8° with ET-EMW200/ET-EMW300, ±15° with ET-EMW400/ET-EMW500)When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
Installation Ceiling/floor, front/rear, free 360-degree installation
Terminals | SDI IN BNC x 1: 3G/HD-SDI input
Terminals | HDMI IN HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*3)
Terminals | DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Terminals | REMOTE 2 IN M3 x 1 for wired remote control
Terminals | LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
Power supply AC 100-240 V, 50/60 Hz
Power consumption 1,050 W
Cabinet materials Molded plastic
Operation noise*1 38 dB (NORMAL) / 32 dB (Quiet)
Operating environment Operating temperature: 0–45 °C (32–113 °F)*6; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit),Smart Projector Control for iOS/Android™
Note *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 4K signals are converted to theprojector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®. *4 With legs at shortest position. *5 Average value. May differ depending on the actual unit. *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level,and the operating environment temperature becomes 35 °C (95 °F) or higher, the light output may be reduced to protect the projector.
Terminals | REMOTE 1 IN D-sub 9-pin (female) × 1 for external control (parallel)
Contrast Ratio*1 3,000,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]
Center-to-corner zone ratio*1 85 %
Filter Included (Estimated maintenance time: approx. 20,000 hours)
Terminal | RGB In D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
Dimensions (W x H x D) 650 x 211*4 x 440 mm (25 19/32˝ x 8 5/16˝*4 x 17 21/64˝ ) (Without lens)
Terminals | DC OUT USB Connector (Type A) x 1 (Output 5 V/2 A)
Terminals | DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net,
HDCP 2.2, Deep Color, 4K/60p signal input*3)
Terminals | SERIAL/MULTI PROJECTOR SYNC IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | SERIAL/MULTI PROJECTOR SYNC OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Weight*5 Approx. 22.3 kg (49.2 lbs)
Screen size [diagonal] 2.03–12.7 m (80–500 in), 16:10 aspect ratio
Terminals | Remote 2 Out M3 x 1 for link control (for wired remote control)
Light output 16,000 lm
LCD panel | Panel size 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
LCD Panel | Number of pixels 2,304,000 ( Pixels 1920 x 1200) pixels x 3

ET-EMT800 3LCD Projector Zoom Lens

et-emt800 3lcd zoom lens product image.png

ET-EMT800

PT-MZ16K Overview

panasonic-pt-mz16k-16000-lumen-wuxga-lcd-4k-signal-input-laser-projector-main-image

Pure Color, High Brightness, and Long-Life Operation

At up to 16,000 lm*1, color erupts in WUXGA. Radiant pictures are achieved with new 15.4 mm (1˝) LCD panels, Multi-Laser Drive Engine, 4K/60p signal input*2, and refined cooling system.

Unbeatable Reliability in the Real-World Conditions

To quickly fix problems while maintaining image display, the projectors feature Panasonic’s new Multi-Laser Drive Engine with failover circuity, a secondary backup signal input, and Information Monitor to show error information.

Compact, Flexible, and Ready for a Stress-free Install

Easy-to-handle compact body weighs under 22.3 kg*3 (49.2 lbs.), runs at just 32 dB*4, and suits seven optional zoom lenses for flexible installation. Setup is expedited with Geo Pro software*5.

 

 

 

1 Brightness for PT-MZ16KL only. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.

2 4K signal input is converted to the projector's resolution (1920 x 1200). Applicable terminals: DIGITAL LINK terminal/HDMI terminal.

3With standard ET-EMS600 lens included.

4Quiet Mode for PT-MZ16KL.

5For more information about activation of optional upgrade kits, please visit PASS for more information.