Sorry, you need to enable JavaScript to visit this website.

PT-DX820U 1-Chip DLP™ Fixed Installation Projector Discontinued

  • Chat with Sales
  • Contact us

PT-DX820

Product details

The quietest high brightness fixed installation projector
Designed for for museums, exhibitions and digital signage applications

Key features

  • 1-Chip DLP, 8200 lumens, XGA
  • Dual lamp system with up to 6000 hours lamp life (in eco mode). Lamp relay mode enabes 24/7 operation
  • Dust-resistant optical engine allows filter-less design
  • Multi-screen support including edge blending and colour matching function
  • Digital Link
View Product Support

Chat with Sales

Specification Description
Power supply 120-240 V AC 9.0-4.0 A, 50/60 Hz
DLP™ chip | Panel size 17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
DLP™ chip | Display method DLP™ chip x 1, DLP™ system
DLP™ chip | Pixels 786,432 (1,024 x 768) x 1, total of 786,432 pixels
LENS PT-DX820W/B
Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm
PT-DX820LW/LB
Optional powered zoom/focus lenses and fixed-focus lens
Lamp 310 W UHM lamps (x 2)
Screen size 1.27-15.24 m (50- 600 inches)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
Brightness 8,200 lumens (dual lamp, LAMP MODE: NORMAL)
Center-to-corner uniformity 90%
Contrast 2,400:1 (full on/full off, in dynamic iris 3 mode)
Resolution 1,024 x 768 pixels
Scanning frequency | HDMI/DVI-D fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz
Scanning frequency | RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz
Scanning frequency | YPBPR (YCBCR) 525i (480i): fH 15.75 kHz; fV 60 Hz,
625i (576i): fH 15.63 kHz; fV 50 Hz,
525p (480p): fH 31.50 kHz; fV 60 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Optical axis shift Vertical: -13% - +50% (powered) (-13% - +45% with the ET-DLE085/DLE105)
horizontal: -10% - +30% (powered) (-10% - +28% with the ET-DLE085/DLE105)
NOTE: Optical
If using the ET-DLE030, the optical axis is fixed.
axis shift function cannot be operated when used with the ET-DLE055
Keystone correction range Vertical ±40°, horizontal: ±15°
(Vertical: ±22° with the ET-DLE055/DLE085/DLE105),
(Vertical: ±5° with the ET-DLE030)
Curved correction (Geometric adjustment)
4 corner correction
Installation Ceiling/floor, front/rear
Terminals | HDMI IN HDMI 19-pin x 1, Deep Color, compatible with HDCP,
Terminals | DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,
for single link only
Terminals | RGB 1 IN BNC x 5
Terminals | RGB 1 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 IN | Video signal 1.0 Vp-p, 75 ohms
Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
Terminals | RGB 2 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | Remoter 1 In M3 jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 jack x 1 for link control
Terminals | Remoter 2 In D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compatible with Art-Net, compliant with
PJLink™ (class 1), Deep Color, compatible with HDCP,
Terminals | USB DC OUT (5V/0.9A)
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
(PT-DX820W/DX820LW : White)
(PT-DX820B/DX820LB : Black)
Dimensions (W x H x D) 498 x 175 x 521 mm
(19-19/32 x 6-7/8 x 20-1/2 inches) (with supplied lens)
498 x 175 x 508 mm
(19-19/32 x 6-7/8 x 20 inches) (without lens, with lens cap)
498 x 175 x 498 mm
(19-19/32 x 6-7/8 x 19-19/32 inches) (without lens and lens cap)
Weight Approx. 17.8 kg (39.2 lbs) (with supplied lens)
Approx. 17.0 kg (37.5 lbs) (without lens)
Operating noise 30 dB (dual lamp operation, LAMP MODE: NORMAL),
28 dB (dual lamp operation, LAMP MODE: ECO)
Operating temperature 0-45 °C (32-113 °F)
Operating humidity 10%-80% (no condensation)
Technology 1-Chip DLP
Scanning frequency | Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Note Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal
cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 With legs at shortest position.
*4 Average value. May differ depending on models.
*5 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m
to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode)
when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately
20% to protect the projector.
Terminals | RGB 1 IN | S-Video signal Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Power consumption 790 W (810 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL)
max. 2,696 BTU (without light output: 2,601 BTU)