21.6V Cordless Mechanical Pulse Tool 160-650Nm
Assure accurate, repeatable fastening on assembly lines where production efficiency and quality control are essential. Featuring torque controlled range of 160-650Nm and 3/4" square drive with through hole, our programmable 21.6V auto shut-off mechanical pulse tool produces superior ergonomics with virtually no torque reaction. Cordless battery power provides freedom of movement and emissions-free operation for demanding manufacturing plants.
- Virtually no torque reaction
- 3/4" square drive with through hole
- Auto shut-off prevents over torques
- Operator visual pass/fail indicator
- Tool body only
|Application Capactiy / Working Speed||Approx. 450 pcs/packApprox. 0.7 sec/1pcs(M16: 180 Nm Stage:6)|
|Applications||M16-M24 Bolt (Tensile Bolt)|
|Battery Indication Lamp||3 Stage|
|Charging Time - Full||75 min|
|Chuck Size||3/4" Square Drive Through Hole|
|Drive||3/4" Square Drive Through Hole|
|Flush Detection Modes||L1: For applications with no pulses before flush point or when fastening fragile materials like plastic to metal.L2: For prevailing torque during run down and varying joint rate applications|
|Impact Per Minute||0 - 2200|
|LED Light||On/Off Switch. (Light will turn off automatically after five minutes of no use)|
|Low Battery Disable||Yes|
|Maximum Torque||Approx. 700 Nm (516 Ft. Lbs.) (M24 bolt).|
|No Load Speed (RPM)||0 - 1600|
|Rehit Prevention||Possible to set per 0.1 sec. between 0 - 3 sec.|
|Tightening Confirmation Lamp||Tightening is finished: Green lightTightening is not finished: Red light|
|Torque Range||approx. 160 – 650 N·m (1415 – 5752 in·lbs)|
|Torque Setting||30 Stage + F (without torque setting mode)|
|Dimensions||9-27/32" x 2-21/64" x 11 5/8"|
Superior ergonomics for improved worker safety
Our mechanical pulse tools are ergonomically designed with worker safety top of mind. Lightweight and balanced with a cushioned grip and virtually no torque reaction reduces operator fatigue and injury while creating a healthier, more productive work environment. A modern cordless design allows total freedom of movement inside vehicles and tight work spaces for greater production efficiency.
Intelligent auto shut-off ensures greater accuracy
Intelligent auto shut-off eliminates over-torque, under-torque and operator-influenced torque issues. The intelligent on-board CPU uses an advanced algorithm to search for seating torque during rundown. Once seating torque is found, the tool switches to torque calculation mode and automatically shuts-off when final torque is achieved, resulting in greater fastening accuracy and repeatability.
Twin hammer design promotes durability and faster work pace
The patented twin hammer design reduces overall tool weight and vibration while increasing output force and working speeds. The primary hammer transfers energy directly to the anvil while the secondary hammer provides additional force and reduces overall noise.
Easy programming for operator lockout
Prevent operators from tampering with tool settings. Use the intuitive remote control to enable rehit prevention, select joint type, view tool data, operator lockout, and restore factory defaults.
Ultra long life Li-ion battery pack
Our same Li-ion technology that powers the most advanced electric cars also powers our cordless assembly tools. GuardION system protection ensures long life and safety as the tool, battery and charger work together as a single energy-efficient eco system. Sensors prevent overcharging/discharging to avoid cell damage and extend battery life. Automatic power shut-off at the battery prevents overheating, doubling battery life over conventional Li-ion battery packs.
Reduce emissions and energy costs
While leaky compressed air systems waste energy and pollute the air with oil vapors, our cordless assembly tools save energy and improve indoor air quality across your facility. A long battery life and increased durability provides a smart, eco-friendly alternative to energy-hogging air tools without sacrificing quality control.
Longer life, lower maintenance costs, less downtime
Much more than on-the-job wear and tear, product life and maintenance cycles are determined by the quality of components inside your tool. That’s where Panasonic durability goes to work for you. Constructed with innovative long-life internal components such as high-efficiency brushless motors and hybrid switches, our cordless assembly tools last considerably longer and cost nearly 80% less to maintain than air tools.
Increase speed and production efficiency
Visual indicator and automatic shut-off provides operators instant visual for OK/NOK status. The highly visible LED light can be seen from rear of tool and helps the operator know whether to move on to the next fastener or stop and rework the product. In addition, a built-in LED light illuminates the assembly area for fast, accurate assembly.
EYFB60B, EYFA08-H, EY0L82B, EYFA31B, EYFA07A_Y_H_G, EYFA41B