Sorry, you need to enable JavaScript to visit this website.

AM100 Single-beam, Single-head Placement

NM-EJM4D

Contact sales
Panasonic Surface Mount AM100

Product details

The AM100 maintains the high standards for capability, flexibility, and reliability customers expect from Panasonic in a cost-effective, incrementally scalable, high-mix SMT solution. Only one machine is required to get production started and it's easy to add more units and/or technologies as demands change.

You'll have the flexibility to prepare the next product while production is running on the AM100 for non-stop changeover and put to use a variety of highly flexible configurations and component supply types. Flexible setup is further enhanced in the AM100 by Feeder Anywhere and Nozzle Anywhere features. Large boards can be processed and advanced features including a component thickness camera, auto support pin exchange, PCB warpage detection, and tray verification are also available.

Key features

  • Single head (single beam) capable of placing an impressive component array including: 0402mm to 120x90x28mm
  • Capable of placing large connectors, odd-shaped components, and advanced packaging types such as PoP
  • Interchangeable feeders, multi-functional nozzles, and chucks with the CM and NPM series
  • Cost-effective and high quality production
View Product Support
Panasonic Surface Mount AM100

Model ID AM100
Model No. NM-EJM4D
PCB Dimensions (mm) L 50 × W 50 to L 510 × W 460
Placement Speed 35,800 cph (0.1006 s/chip),
12,200 cph (0.295 s/QFP 12 mm or less)
Placement Accuracy (Cpk1) ±40 µm/chip
±50 µm/QFP 12 mm or less
±30 µm/QFP 12 mm over to 32 mm or less
Component Supply: Taping * (Tape : 4 / 8 mm tape (small reel) )
Tape feeder specification : Max. 160
Tray feeder specification : Max. 120 
[*1]
Component Supply: Stick * Tape feeder specification : Max. 40
Tray feeder specification : Max. 30
[*1]
Component Supply: Tray * Tray feeder specification: Max. 20 
[*1]
Manually setting tray specification: Max. 20 
[*2] (Option for the fixed feeder base)
Component Dimensions (mm) 0402 chip [*3] to L 120 × W 90 or L 150 × W 25 (T=28 [*4])
PCB Exchange Time 4.0 s (where there is no placement component on the rear side)
Electric Source 3-phase AC 200 / 220 V ±10 V, AC 380 / 400 / 420 / 480 V ±20 V 2.0 kVA
Pneumatic Source Min.0.5 MPa to Max.0.8 MPa, 200 L /min (A.N.R.)
Dimensions (mm) * W 1,970 × D 2,019 [*5] × H 1,500 [*6]
Mass * 2,650 kg 
[*7]
*Values such as maximum speed may vary depending on operating conditions.
*Please refer to the ‘‘Specification’’ booklet for details.
[*1]: In case of Single tray
[*2]: When installed on both sides of the rear fixed feeder base
[*3]: The 0402 chip requires a specific nozzle/feeder. 0402 mounting compatibility is optional
[*4]: For components with a height of 25 mm or more, a dedicated nozzle is required
[*5]: The D measurement indicates the size of the machine with the fixed feeder bases in the front and rear
For front and rear feeder cart specifications, D measures 2,282 mm and, with the tray feeder connected (front side fixed feeder base), 2105 mm
[*6]: The signal tower and touch panel are not included
[*7]: The machine body plus 4 fixed feeder bases (varies depending on the machine layout)
Download Spec Sheet (PDF)

Brochures