Sorry, you need to enable JavaScript to visit this website.

RG131 Radial Inserter with Guide Pin

NM-EJR3A/NM-EJR4A

Product details

A high-density radial lead component insertion machine, the RG131 with guide pin system provides stable, high-density insertion at 14,400 cph (0.25s/component). 

This through-hole machine inserts components with a pitch range of 2.5mm, 5.0mm or 7.5mm and allows for 40 or 80 component inputs - a wide component range in a compact footprint with a low cost of ownership. 

Full auto-recovery corrects insertion errors while the part exhaust detection system allows for proactive part replenishment and promotes continuous productivity.

Key features

  • 4 insertion directions (0°, 90°, -90°, 180°)
  • Wide pitch range encompassing 2.5/5.0/7.5 and 10 mm pitch in a common platform - eliminating the need for post insertion manual placements of 10 mm pitch components
  • Auto-recovery and part exhaust detection
  • Enhanced programmable T-Clinch technology ensures interference-free insertions by eliminating shorts on underside layout
  • Wide component range up to 18 mm diameter (ø)

Specification Description
Model ID RG131
Model No. NM-EJR3A
PCB Dimensions (mm) L 50 mm x W 50 mm to L 508 mm x W 381 mm
Maximum Speed * 0.25 s/component to 0.6 s/component
[*1]
No. of Component Inputs 40
Applicable Components Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm
Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
PCB Exchange Time ~2s to about 4s (Room temperature 20℃)
Insertion Direction 4 directions (0°, 90°, -90°, 180°)
Electric Source * 3-phase AC 200 V, 3.5 kVA
[*2]
Pneumatic Source 0.5 MPa, 80 L/min (A.N.R.)
Dimensions (mm) W 3,200 x D 2,417 x H 1,620
[*3]
Mass 2,250 kg
Model No. NM-EJR4A
PCB Dimensions (mm) L 50 x W 50 to L 508 x W 381
Maximum Speed * 0.25 s/component to 0.6 s/component
[*1]
No. of Component Inputs 80 (Connection mode), 40 + 40 (Exchange mode)
Applicable Components Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm
Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
PCB Exchange Time ~2s to about 4s (Room temperature 20℃)
Insertion Direction 4 directions (0°, 90°, -90°,180°)
Electric Source * 3-phase AC 200 V, 3.5 kVA
[*2]
Pneumatic Source 0.5 MPa, 80 L/min (A.N.R.)
Dimensions (mm) * W 3,200 x D 2,417 x H 1,620
[*3]
Mass 2,350 kg
* Values such as maximum speed may vary depending on operating conditions.
* Please refer to the ‘‘Specification’’ booklet for details.
[*1]: On condition
[*2]: Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V
[*3]: Excluding signal towe