Sorry, you need to enable JavaScript to visit this website.

AV132 Axial Inserter

NM-EJA6A/NM-EJA5A

Product details

The AV high-speed axial lead component insertion machine features a compact design and 30,000 CPH performance. The dense supply unit configuration is available in 40 or 80 component inputs with optional jumper wire and accommodates both ammo pack and reel. Quicken changeover with the dual partition setup and set up the next job while the current one is being produced.

The AV132 inserts components in four directions: 0°, 90°, 180°, and 270°. Maximize your productivity through the simultaneous use of 26 and 52mm taped components and quick, full auto-recovery.

Key features

  • High-speed axial insertion. 30,000 CPH with 40 or 80 inputs.
  • Reduce load time by running two PCBs at once
  • Low cost per insertion
  • Easy-to-use touch panel

Specification Description
Model ID AV132
Model No. NM-EJA6A
PCB Dimensions (mm) L 50 mm x W 50 mm to L 508 mm x W 381 mm
Maximum Speed * 0.12 s/component
[*1]
No. of Component Inputs 40 + 40 + JW (JW is optional)
Applicable Components Resistors 1/8 W,1/6 W,1/4 W,1/2 W, Jumper wire (tin-plated wire), Diodes, Cylindrical ceramic capacitor
PCB Exchange Time About 2.0 s
Insertion Direction 4 directions (0°, 90°, 180°, 270°)
Electric Source * 3-phase AC 200 V, 3.5 kVA
[*2]
Pneumatic Source 0.5 MPa, 200 L/min (A.N.R.)
Dimensions (mm) * W 3,106 mm x D 2,300 mm x H 1,575 mm
[*3]
Mass * 2,648 kg
[*4}
Model No. NM-EJA5A
PCB Dimensions (mm) L 50 x W 50 to L 508 x W 381
Maximum Speed * 0.12 s/component
[*1]
No. of Component Inputs 40 + JW (JW is optional)
Applicable Components Resistors 1/8 W,1/6 W,1/4 W,1/2 W, Jumper wire (tin-plated wire), Diodes, Cylindrical ceramic capacitor
PCB Exchange Time About 2.0 s
Insertion Direction 4 directions (0°, 90°, 180°, 270°)
Electric Source * 3-phase AC 200 V, 3.5 kVA
[*2]
Pneumatic Source 0.5 MPa, 200 L/min (A.N.R.)
Dimensions (mm) * W 2,104 x D 2,300 x H 1,575
[*3]
Mass * 2,228 kg
[*4]
* Values such as maximum speed may vary depending on operating conditions.
* Please refer to the ‘‘Specification’’ booklet for details.
[*1]: On condition
[*2]: Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V
[*3]: Excluding signal tower
[*4]: Only for main body