Multi-Tool Assembly Controller, EYFR03A
Ensure high-level error proofing while improving productivity and quality control on your assembly line. Our Multi-Tool Assembly Controller provides expansion capability so you can program up to 16 power tools, simultaneously or sequentially, and gain the versatility your production process demands. Advanced error-proofing, quality control and increased productivity for any assembly line. Eliminate assembly errors for good.
- Error proofing with multiple Panasonic wireless programmable tools
- Program up to 16 Panasonic tools simultaneously or sequentially
- Multi communication platforms available for data collection
- Operator visual and audio feedback
- Secure ZigBee® wireless communication
|Out of Range/Antitheft
|YES – Simplifies connecting a tool to the qualifier
|EYFLA4AR, EYFLA5AR, EYFLA5PR, EYFLA5QR, EYFLA6P, EYFLA6PR, EYFLA6JR, EYFMA1PR, EYFMA1JR, EYFPA1PR, EYFGA1NR, EYFGA2NR, EYFGA3NR
|No. Connected Devices
|Onboard (Up To 10,000) or via Ethernet
|YES – 8/12
|Fastener Count Function
|EtherNet/IP. Open Protocol. ToolsNet
|Graphics Display and User Interface
|Run up to 16 tools simultaneously
|Number of Inputs
|Sequence each tool.
|Number of Outputs
|Run one tool at a time
|100 - 240V AC
|Extremely Secure Zigbee Wireless Communication
|10—1/4" x 10—3/4" x 4—1/4"
Simple tool connection with auto learn
Connecting a wireless tool to the qualifier is simple with the auto learn feature. By pressing the "LEARN" button, the qualifier scans the area for a new tool. Once a new tool is found, the qualifier automatically creates a secure link between the tool and qualifier. The qualifier automatically creates a basic setup program allowing for immediate use of the tool.
Error proofing | Poka-yoke
Reduce the number of defects by incorporating the assembly qualifier (AQ) and enjoy that next level of security through advanced error proofing. AQ's error proofing capabilities include:
• OK/NOK results
• Visual and audio feedback
• Tool sequencing
• Rehit prevention
• Batch count
• Remote I/O (PLC)
• Data collection
Assure product quality with proof
Part traceability plays an important role in assuring your customers with documentation about your assembly process. Panasonic AQ provides multiple options for data collection. The torque data sent by the tool to the controller can be married with the serial number, captured by a PLC or bar code Scanner, and stored for future retrieval or sent to a server. Stores up to 10,000 rundowns which can be downloaded to a USB stick.
Assembly qualifier programming software
EYFR03 Assembly Manager is the user-friendly software for programing the Multi Tool Assembly Qualifiers using direct or remote connections. The software opens to the live status page showing the current AQ display and quick links for basic programing of Panasonics Wireless Assembly Tools. Easily and quickly create, backup or restore controller setting within seconds of connecting to an AQ controller.
Secure tool communication
The AQ uses Xbee, a form of Zigbee®, to communicate wirelessly with Panasonic assembly tools and provides an interference-free network. Due to the frequency that Xbee uses, no other wireless devices are affected by this signal.
Operator visual indicator
Reduce the overall assembly process time with an operator visual for OK/NOK and batch complete status. The highly visible display can be seen over 20' away. The adjustable audible tone registers up to 85db to notify the operator of a pass or failed fastener. This visual and audio feedback helps the operator know whether to move on to the next fastener or stop and rework the product.
Benefit from the batch count feature when fastening multiple screws. Simply connect the controller directly to a line stop or a PLC to prevent defects from moving down the assembly line.