When fastening exactness is critical, accurately detecting flush and snug points are essential. A high resolution encoder senses motor rotation angle precisely and detects exact flush points for varying joint types.

Anvil angle pulses-per-rotation are 8 times faster compared to our standard mechanical pulse tools, delivering improved accuracy of the highest order. 7-stage snug point detection on L1-L7 applications ensure your line produces the highest levels of accuracy for light and heavy loads.

Consistent pulse control ensures the power of each pulse stays constant regardless of remaining battery capacity, resulting in greater precision. Before battery power becomes too low to maintain torque, the tool shuts down automatically, preserving fastening specifications and quality assurance.

Feature-rich programmable functionality helps improve fastening accuracy, quality control, automation and efficiency across your plant. Easily program these valuable features:

• Socket extension mode Auto adjusts tool RPM during pulsing to improve accuracy when using an extension.

• Cross thread reduction The tool first reverses 540 degrees, aligning the threads and greatly reducing the likelihood of cross threads.

• Cross thread/rehit detection If shut-off is activated before the programmable minimum runtime, the tool alerts operator of an NOK fastening.

• Retightening prevention To eliminate over-torqueing, prevents tool operation within a selected time after automatic stop from torque control sensor. Switch will not operate if engaged during this time period.

• Maintenance interval alarm When total fastenings are within 10,000 of the preset maintenance interval, a notification shows on the display. When preset interval is reached, tool is locked out from further use. Ensures regular maintenance and long tool life.

• Flush detection delay Delays Flush Detection mode and ignores loads for a pre-selected time.