10.8V Cordless Mechanical Pulse Tool, 3-22Nm

 

EYFLA4AR

Product details

Assure accurate, repeatable fastening on assembly lines where production efficiency and quality control are essential. Featuring torque controlled range of 3-22Nm and a 1/4" hex quick-change chuck, our wireless programmable 10.8V auto shut-off mechanical pulse tool produces superior ergonomics with virtually no torque reaction. Cordless battery-powered design provides freedom of movement and emissions-free operation for demanding manufacturing plants

Key features
  • Tool body only
  • Wireless programmable for advanced error proofing
  • 1/4" hex quick change chuck
  • Auto shut-off prevents over torques
  • Operator visual pass/fail indicator
Application Capactiy / Working Speed Approx. 1200pcs/pack Approx. 0.7sec/pc (M6: 10 Nm, Stage: 19)
Applications M5-M6 Screw (Normal - Tensile Bolt) M8 Bolt (Normal Bolt)
Battery Capacity 3.0Ah or 2.0Ah
Battery Indication Lamp 3 Stage
Brushless Motor YES
Charging Time - Full 45 min
Drive 1/4" Hex Quick Change Chuck
Flush Detection Modes L1: For applications with no pulses before flush point or when fastening fragile materials like plastic to metal. L2: For prevailing torque during run down and varying joint rate applications.
Hybrid Switch YES
Impact Per Minute Stage 1: 0 – 1900 Stage 2: 0 – 2500 Stage 3: 0 – 2800 Stage 4-8: 0 – 3000 Stage 9-30 & F: 0 – 4000
LED Light On/Off Switch. (Light will turn off automatically after five minutes of no use)
Low Battery Disable Yes
Maximum Torque Approx. 40 Nm (29 Ft. Lbs.) (M10 bolt)
No Load Speed (RPM) Stage 1: 0 – 950 Stage 2: 0 – 1300 Stage 3: 0 – 1450 Stage 4-8: 0 – 1550 Stage 9-30 & F: 0 – 2300
Rehit Prevention Possible to set per 0.1 sec. between 0 - 3 sec.
Tightening Confirmation Lamp Tightening is finished: Green light Tightening is not finished: Red light
Torque Range Approx. 3-22Nm (2.2-16.2 Ft. Lbs)
Torque Setting 30 Stage + F (without torque setting mode)
Voltage 10.8V
Wireless Communication Yes with Panasonic Quality Control Monitoring System
Dimensions 6 7/32" x 2 21/64" x 9 25/32"
Weight 2.8 lbs

Superior ergonomics for improved worker safety

Our mechanical pulse tools are ergonomically designed with worker safety top of mind. Lightweight and balanced with a cushioned grip and virtually no torque reaction reduces operator fatigue and injury while creating a healthier, more productive work environment. A modern cordless design allows total freedom of movement inside vehicles and tight work spaces for greater production efficiency.

Advanced error proofing | Poka-yoke

Easy wireless communication with our single- and multi-tool qualifiers ensure high-level error proofing and higher production on any assembly line. Automate plant floor efficiency across sequences and workstations with PLC integration, batch counting, detailed data collection and torque analytics, anti-theft disable, and more. Program up to 16 tools, simultaneously or sequentially, for the versatility your production process demands..

Intelligent auto shut-off ensures greater accuracy

Intelligent auto shut-off eliminates over-torque, under-torque and operator-influenced torque issues. The intelligent on-board CPU uses an advanced algorithm to search for seating torque during rundown. Once seating torque is found, the tool switches to torque calculation mode and automatically shuts-off when final torque is achieved, resulting in greater fastening accuracy and repeatability.

Easy programming for operator lockout

Prevent operators from tampering with tool settings. Use the intuitive remote control to enable rehit prevention, select joint type, view tool data, operator lockout, and restore factory defaults.

Ultra long life Li-ion battery pack

Our same Li-ion technology that powers the most advanced electric cars also powers our cordless assembly tools. GuardION system protection ensures long life and safety as the tool, battery and charger work together as a single energy-efficient eco system. Sensors prevent overcharging/discharging to avoid cell damage and extend battery life. Automatic power shut-off at the battery prevents overheating, doubling battery life over conventional Li-ion battery packs.

Reduce emissions and energy costs

While leaky compressed air systems waste energy and pollute the air with oil vapors, our cordless assembly tools save energy and improve indoor air quality across your facility. A long battery life and increased durability provides a smart, eco-friendly alternative to energy-hogging air tools without sacrificing quality control.

Longer life, lower maintenance costs, less downtime

Much more than on-the-job wear and tear, product life and maintenance cycles are determined by the quality of components inside your tool. That’s where Panasonic durability goes to work for you. Constructed with innovative long-life internal components such as high-efficiency brushless motors and hybrid switches, our cordless assembly tools last considerably longer and cost nearly 80% less to maintain than air tools.

Increase speed and production efficiency

Visual indicator and automatic shut-off provides operators instant visual for OK/NOK status. The highly visible LED light can be seen from rear of tool and helps the operator know whether to move on to the next fastener or stop and rework the product. In addition, a built-in LED light illuminates the assembly area for fast, accurate assembly.

Programmable fastening strategies

Quality-driven assembly lines require intelligent tools. Feature-rich programmable functionality helps improve fastening accuracy, quality control, and efficiency across your plant. Includes quickset features for rundown speed, rehit detection, cross thread reduction, OK/NOK audio indicator, variable speed control, auto downshift, minimum runtime, and maintenance interval alarm.

Accessories

EYFB32B, EYFB30B, EYFA02-H, EYFA03-H, EY0L82B, EYFA31B, EYFA01A_Y_H_G, EYFLM-H