Sorry, you need to enable JavaScript to visit this website.
panasonic-pt-rz16k-16000lm-3-chip-dlp-large-venue-laser-projector-head-image

PT-RZ16KU

Product details

Project at a full 16,000 lm brightness on AC 100–120 V with the smallest 16,000 lumen Solid Shine Laser Projector. Stunning image quality in a compact body designed for large venues. Exchangeable lens, 24/7 Operation, Digital link, Geometric Adjustment, 360° flexible installation.

  • 3D Professional
  • Digital Link
  • Solid Shine Laser
  • Geo Pro
  • 360-Degree Free Installation

Specification Description
Projector type 3-Chip DLP™ projector
DLP™ chip | Panel size 24.4 mm (0.96 in) diagonal (16:10 aspect ratio)
DLP™ chip | Display method DLP™ chip x 3, DLP™ projection system
DLP™ chip | Number of Pixels 2,304,000 (1920 x 1200 pixels) x 3
Light source Laser Diode
Light output 16,000 lm*1/16,800 lm (Center)*2
Time until light output declines to 50 %*3 20,000 hours (Normal)/24,000 hours (Eco)
Resolution WUXGA (1920 x 1200 pixels)
Contrast Ratio*1 20,000:1 (Full On/Full Off, Dynamic Contrast: [3])
Screen size [diagonal] 1.78–25.4 m (70–1,000 in), 1.78–15.24 m (70–600 in) with ET-D75LE8/ET-D3LET80, 3.05–15.24 m (120–600 in) with ET-D75LE95
Center-to-corner zone ratio*1 90 %
LENS Optional (no lens included with this model)
Lens shift*4 | Vertical(From the origin point of the lens mounter) ±55 % (+78 %, +68 % with ET-D75LE95, ±48 % with ET-D3LEW200, ±44 % with ET-D75LE6/ET-D3LEW60) (powered)
Lens shift*4 | Horizontal(From the origin point of the lens mounter) ±20 % (±15 % with ET-D75LE6/ET-D3LEW60/ET-D3LEW200, ±12 % with ET-D75LE95, +25 %, 0 % with ET-D3LEU100) (powered)
Keystone correction range Vertical: ±40 ° (±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), Horizontal: ±15 ° (±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95
Terminals | HDMI IN HDMI x 1 (Deep Color, compatible with HDCP
Terminals | DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP) (Single-link only)
Terminals | SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals | SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals | REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
Terminals | REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
Terminals | REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
Terminals | DC OUT USB Type A x 2 (for power supply, DC 5 V total of 2 A)
Power supply AC 100–240 V, 50/60 Hz
Power consumption 1100 W
Operation noise*1 42 dB
Dimensions (W x H x D) 600 mm x 307 mm*5 x 745 mm (23 5/8˝ x 12 3/32˝*5 x 29 11/32˝) (including protruding parts); 598 mm x 270 mm*6 x 725 mm (23 17/32˝ x 10 5/8˝*6 x 28 17/32˝ ) (not including protruding parts)
Weight*7 49.0 kg (108 lbs)
Operating environment Operating temperature: 0–50 °C (32–122 °F)*8 ; Operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™
Note *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in Normal Mode. *3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Normal Mode, Dynamic Contrast [3], temperature 35 °C (95 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *4 Lens shift is not supported on the ET-D3LEW50. *5 With legs at shortest position. *6 Excluding legs. *7 Average value. May differ depending on the actual unit. *8 Operating temperature is 0–45 °C (32–113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level. When operating in Eco or Normal mode at elevations between 0–2,700 m (0–8,858 ft) in ambient temperatures exceeding 35 °C (95 °F), or at elevations between 2,700–4,200 m (8,858–13,780 ft) in ambient temperatures exceeding 25 °C (77 °F), light output may be reduced to protect the projector.
Terminals | DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP
Terminals | RGB 1 IN RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR/YC/VIDEO
Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1: RGB/YPBPR
Keystone correction range with optional Upgrade Kit ET-UK20 Vertical: ±45 ° (± 40 ° with ET-D75LE10/ET-D3LEW10/ET-D75LE20/ET-D3LES20, ±28 ° with ET-D75LE6/ET-D3LEW60, ±22 ° with ET-D3LEW50, ±15 ° with ET-D3LEW200, ±8 ° with ET-D3LEU100, +5 ° with ET-D75LE95), Horizontal: ±40 ° (±15 ° with ET-D3LEW50/ET-D75LE6/ET-D3LEW60, ±5 ° with ET-D3LEU100/ET-D3LEW200, 0 ° with ET-D75LE95) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. 
Terminals | SDI 1 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1)
Terminals | SDI 2 IN BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2)
Terminals | MULTI PROJECTOR SYNC IN / 3D SYNC 1 IN/OUT BNC x 1
Terminals | MULTI PROJECTOR SYNC OUT / 3D SYNC 2 OUT BNC x 1

View Product Support

Chat with Sales