Sorry, you need to enable JavaScript to visit this website.

AV-HS410 HD/SD Multi-Format Live Video Switcher Discontinued

  • Live Chat
  • Contact us

AV-HS410 $DISCONTINUED

Product details

An HD/SD-selectable 1ME Switcher incorporating a host of inputs and outputs, effects, and system expandability into its compact, 19 type, half-rack size. It provides versatile effects, including transitions with digital video effects and Primatte® chroma keying. New video memory, Memory Preview, enhanced MultiViewer functions, and a button layout that is designed to simplify live relay operation.

DISCONTINUED

This product has been discontinued.

For a similar replacement, please check out the AV-UHS500.

Key features

  • High-End Performance and Functions
  • Super Expandable 1ME Switcher
  • HD/SD Multi-Format with 9 Inputs Standard, 13 Inputs Maximum
  • New Memory Functions and Versatile, High-Quality Effects
  • 7 inch color LCD monitor for easy-to-see screen settings
View Product Support

Live Chat

DISCONTINUED

This product has been discontinued.

For a similar replacement, please check out the AV-UHS500.

Specification Description
Power supply AC 100 V to 240 V, 50/60 Hz
Power consumption 88 W
General -
Humidity 10 % to 90 % (no condensation)
Ambient Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Mass Approx. 6.2 kg (13.669 lb)
[excluding accessory parts when no options have been installed]
Approx. 6.6 kg (14.550 lb)
[excluding accessory parts when all the possible options have been installed]
Video Terminal -
Video Outputs (10 signal lines, maximum) Standard SDI: 5 signal lines BNC x 6 (SDI OUTPUT 1 to SDI OUTPUT 5 x 1 line each,
2 distributed outputs for SDI OUTPUT 1 only)

Standard DVI-D: 1 signal line DVI-D x 1

Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2) (Up to two option boards can be installed in the two input/output slots.)

• PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and MEM PVW can be assigned to SDI OUTPUT 1 to SDI OUTPUT 5, DVI-D, OUT, OUT A1, OUT A2, OUT B1 and OUT B2.
• CLN can be pre-selected from KEY or DSK using a menu.
Signal Formats SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*, 1080/23.98PsF*
*The following option boards are not supported:
AV-HS04M1, AV-HS04M2, AV-HS04M3, AV-HS04M4, AV-HS04M5,AV-HS04M6, AV-HS04M7
Dimensions (W x H x D) 440 mm x 158 mm x 361 mm
(17-5/16 inches x 6-7/32 inches x 14-7/32 inches)
[excluding protrusions]
Video Inputs (13 signal lines, maximum) Standard SDI: 8 signal lines BNC x 8 (SDI INPUT 1 to SDI INPUT 8)
• The up-converter function can be used for the SDI INPUT 5 to SDI INPUT 8 connectors.

Standard DVI-D: 1 signal line DVI-D x 1

Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2) (Up to two option boards can be installed in the two input/output slots.)
Signal Processing Y:Pb:Pr 4: 2: 2, 10 bit (8 bits for video memory)
RGB 4:4:4, 8 bit
ME Number 1ME
SDI Inputs HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)

8 signal lines, standard: IN1 to IN8
12 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M1 boards are used; with active through)

HD: SMPTE 292M (BTA S-004B) standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer More than 100 m (328 ft) (when 1.5 Gbps/5C-FB cable is used)

SD: SMPTE 259M standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used)
SDI Outputs HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)

5 signal lines, standard: OUT1 x 2; OUT2 to OUT5 x 1 each
9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M7 boards are used)

HD: SMPTE 292M (BTA S-004B) standard complied with
• Output level: 0.8 V [p-p]±10 %
• Rise time: HD: Less than 270 ps
• Fall time: HD: Less than 270 ps
• Difference between rise time and fall time: HD: Less than 100 ps
• Alignment jitter: HD: Less than 0.2 UI (130 ps)
• Timing jitter: HD: Less than 1.0 UI
• Eye aperture ratio: More than 90 %
• DC offset: 0 ±0.5 V

SD: SMPTE 259M standard complied with
• Output level: 0.8 V [p-p] ±10 %
• Rise time: Less than 1.5 ns
• Fall time: Less than 1.5 ns
• Difference between rise time and fall time: Less than 0.5 ns
• Jitter: Less than 0.2 UI
Composite Input (Option board) Analog composite signal (NTSC/PAL) (1.0 V [p-p], 75 Ω)

4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M6 boards are used; with loop-through)
Analog Input (Option board) SD/HD analog component Y/PB/PR (1.0 V [p-p], 75 Ω)

4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M2 boards are used)
Analog Output (Option board) SD/HD analog component Y/Pb/Pr (1.0 V [p-p], 75 Ω)

4 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2 (When two AV-HS04M4 boards are used)
• 2 signal lines (OUT A1, OUT B1) when two AV-HS04M5 boards are used.
DVI-I Input (Option board) Analog/digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024)
Vertical frequency: 60 Hz
• This connector does not support the HDCP technologies.

4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2 (When two AV-HS04M3 boards are used)
DVI-I Output (Option board) Analog/digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+* (1680 x 1050), UXGA* (1600 x 1200), WUXGA* (1920 x 1200)
*Selectable only when digital signals are output.
Vertical frequency: 60 Hz
• This connector does not support the HDCP technologies.

2 signal lines, maximum: OUT A2, OUT B2 (When two AV-HS04M5 boards are used)
DVI-D Input (Option board) Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50p, 1080/59.94p
• Analog input signals are not supported.
• This connector does not support the HDCP technologies.

4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M8 boards are used)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft).
DVI-D Input/Output Digital RGB: XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Video format inputs:
Digital RGB: 1080/50p, 1080/59.94p
Vertical frequency: Same as system formats
Video format outputs:
Digital RGB: 1080/50p, 1080/59.94p, 1080/50i, 1080/59.94i, 720/50p, 720/59.94p
• The input and output of analog signals are not supported.
• Output support the high-resolution multi view mode:
Signals are output with a high resolution even when SD is set as the system mode.
(When high-resolution multi view mode has been enabled, MV is selected as the DVI-D OUT output, and it is not possible to select MV with SDI OUT.)
• This connector does not support the HDCP technologies.

Standard input/output: 1 line each (DVI-D IN, DVI-D OUT)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft).
LAN RJ-45 x 1
10BASE-T/100BASE-TX (For IP control)
Connecting cable:
LAN cable (category 5 or above), max. 100 m (328 ft), STP (Shielded Twisted Pair) cable recommended
• When connecting to a hub (switching hub), use a straight cable. Use a crossover cable when connecting the unit and computer on a 1:1 basis without going through a hub.
• Use with the same segment is recommended for the equipment which is connected to the unit. If the unit is connected to equipment whose segments are different, events
dependent upon the settings inherent to the network equipment, for instance, may occur so thoroughly check the connections with the equipment to which the unit will be connected prior to the start of operation.
Accessories CD-ROM (Operating Instructions , Operating Instructions , User Guide “AV-HS410 Image Transmission Software”, DVI input level adjustment file (BW.bmp), Image Transmission Software (ImageTrans.exe)), Power cable (2 m [6.6 ft])
Video Delay Time 1 line (H)
When the frame synchronizer setting is “Off” and the up-converter setting is “Off”.

1 frame (F)
When the frame synchronizer setting is “On” or the up-converter setting is “On”.

• When the signals have passed through PinP, DVE, multi view, down-converter, DVI-IN or DVI-OUT, a maximum delay of 1 frame is applied in each case.
Other BOOT switch [SV/NM (service/normal)] (for maintenance purposes)
Normally, this switch is used as the “NM” position.
Synchronous Terminal -
Control Terminal -
EDITOR D-sub, 9-pin, female
Used to control an editor
RS-422 control connector
Communication format
Baud rate: 38400 bps
Character length: 8 bit
Parity: Odd
Stop bit: 1 bit
Flow control: None
COM D-sub, 9-pin, female
Used to control an external device
RS-422 control connector
Communication format (selected using a menu)
• Mode: 1 (default setting)
Baud rate: 9600 bps
Character length: 8 bit
Parity: None
Stop bit: 1 bit
Flow control: None
• Mode: 2
Baud rate: 38400 bps
Character length: 8 bit
Parity: Odd
Stop bit: 1 bit
Flow control: None
• Mode: 3
Baud rate: 38400 bps
Character length: 8 bit
Parity: None
Stop bit: 1 bit
Flow control: None
Reference Input/Output In gen-lock mode: Black burst or Tri-level Sync input signals (with loop-through)
In internal sync mode: Black burst output signals x 2
• Same field frequencies as those of the system formats supported.
• With the 1080/24PsF format, only gen-lock mode supported.
• With the 1080/23.98PsF format, black burst with 10F-ID (SMPTE318M standard met) or TRI signals supported.
TALLY/GPI 1, TALLY/GPI 2 D-sub, 15-pin, female ( x 2)
Input: 8 inputs, general-purpose, photocoupler sensing
Output: 19 outputs; selected from R/G tally, general-purpose
Alarm: 1 output, open collector output (negative logic)

AW-HR140 Outdoor Professional PTZ Camera

AW-HR140 High Quality Broadcast Livestreaming Outdoor PTZ Camera for Video Production with Waterproof Protection and Dust Proof Housing

AW-HR140

AW-HN130 HD Professional PTZ Camera with NDI®|HX

Panasonic AW-HN130W and AW-HN130K NDI robotic network ptz cameras

AW-HN130 DISCONTINUED

So Many Options, So Many Boards

The AV-HS410 is compact and versatile with nine inputs standard (eight HD-SDI, one scaleable HD DVI-D) and is expandable using option boards to a maximum of 13 HD/SD switchable signal inputs. Five HD-SDI and one DVI-D outputs are also standard with option boards enabling expansion to a maximum of 10 outputs. Two expansion slots allow the simultaneous use of up to two AV-HS04M Series dual-channel input or output boards. 

Get on the AUX Bus

Four AUX busses are provided to enable versatile production workflow, with mix transitions available on AUX1. Dual PinP (with transition memories), one DSK, and an upstream keyer with 3D flying key and Primatte® Chroma key capabilities are also provided. Numerous high-quality 3D and 2D effects are available for transitions for both background and key. All input channels feature a built-in switchable frame synchronizer, while upconverters are available for four channels and 16-axis color correction for the eight standard HD-SD/SDI inputs. The HS410's system frequency is switchable among 60Hz, 50Hz, and 24Hz, enabling international operation and digital cinema style live switching.

Simple Operation makes Live so Easy

The HS410's user-friendly interface is distinguished by the 7" WVGA (800 x 480 pixels) color LCD monitor that in addition to displaying settings and menus can show input and output video, waveform monitor readings and even the Multiviewer display. MultiViewer configurations include assignable screen divisions into 4/5/6/9/10/16 sections and support the display of time, audio level meters and 4:3 markers. The switcher's simple panel layout features dedicated buttons for many common functions such as PinP 1/2, as well as A bus and B bus rows with 12 crosspoint buttons (22 with shift function) allowing easy access to a variety of internal and external sources.

Get Custom with It

Advanced features include dual-channel video/still clip player/recorders, 100 event memories, Effect Preview (for offline viewing of programmed effects), timeline editing and customizable Plug-in programs for external device control and many other applications. An SDK (Software Development Kit) is available from Panasonic to enable the creation of powerful custom Plug-in programs.