AV-HS60U2 Mainframe w/ Redundant Power Supply

 
  • Chat with Sales

  • Contact us
  • Add to Briefcase
  • Share

AV-HS60U2 $19,500.00

Product details

Mainframe - Redundant Power Supply Model - for AV-HS6000 Series

View Product Support

Chat with Sales

Dimensions (W x H x D) 482 mm×132 mm×418 mm
(18-31/32 inches×5-3/16 inches×16-15/32 inches)(excluding protrusions)
Weight Approx. 13.5 kg(29.7 lbs.)(excluding accessories)
Power supply AC100 V to 240 V, 50 Hz/60 Hz
(AV-HS60U2 supports redundant power supply)
Power consumption 110 W
Storage Temperature 0°C to 40°C (32°F to 104°F)
Storage Humidity 10% to 90% (no condensation)
Ambient Operating Temperature 0°C to 40°C (32°F to 104°F)
Operating Ambient Humidity 10% to 90% (no condensation)
Video Terminal -
SDI IN 1 to SDI IN 32 Terminals During Standard mode
32 lines
• Connectors: BNCx32
• SDI IN 27, SDI IN 28, SDI IN 31, SDI IN 32 terminals are equipped with up-converters.
• SDI IN 25 to SDI IN 32 terminals are equipped with color correctors.

HD-SDI
SMPTE292M (BTA S-004) standard compliant
• 0.8 V [p-p]±10% (75 Ω)
• Automatic equalizer 100 m (328 ft) (when 1.5 Gbps/5C-FB cable is used)

SD-SDI
SMPTE259M standard compliant
• 0.8 V [p-p]±10% (75 Ω)
• Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used)

During 3G mode
16 lines
• Connector: BNC×16 (only the odd numbered terminals can be used)
• The even numbered terminals , ... cannot be used.
• , , , and terminals are equipped with color correctors.

During 4K mode
8 lines
• Connector: BNC x 32 (3G-SDI x 4 SQD)

3G-SDI
3G serial digital, SMPTE424M standard compliant
• 0.8 V[p-p] ±10% (75 Ω)
• Automatic equalizer 100 m (328 ft) (when 3 Gbps/5C-FB cable is used)
• 3G‑SDI Level B
3G-SDI Level A (FS ON)
DVI-D IN 1 to DVI-D IN 2 Terminals 2 lines
Digital RGB:XGA (1024×768), WXGA (1280×768), SXGA (1280×1024), WSXGA+ (1680×1050),UXGA (1600×1200), WUXGA (1920×1200)
Vertical frequency: 60 Hz
Video format inputs: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
• Connectors: DVI-D×2
• The terminals do not support HDCP.
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to 5 m.(16.4 ft)
• / terminals cannot be used during 3G mode and 4K mode.
SDI OUT 1 to SDI OUT 16 Terminals During Standard mode
16 lines (2 distributed outputs per line)
• Connectors: BNCx32
• ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16 can be assigned.

HD-SDI: SMPTE292M (BTA S-004) standard compliant
• Output level: 0.8 V [p-p]±10%

SD-SDI: SMPTE259M standard compliant
• Output level: 0.8 V [p-p]±10%

During 3G mode
3G‑SDI output: 8 lines (2 distribute outputs per line)
HD-SDI output: 2 lines (2 distribute outputs per line)
• Connector
3G‑SDI: BNC×16 (odd numbered terminals only)
HD-SDI: BNC×4 ( and terminals only)
• 3G‑SDI signal is not output from the even numbered terminals.
- No signal is output from the , ... terminals.
- The HD-SDI signal converted to the 1080i format is output from the and terminals. This signal is converted to the 1080i format by decimating the 1080p signal from the and terminals.
• and terminals are equipped with color correctors. The same color corrector setting is also applied to and terminals.
• ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned.

3G-SDI: 3G serial digital, SMPTE424M standard compliant
• Output level: 0.8 V [p-p] ±10%
• 3G‑SDI Level B Mapping
Video Delay Time During Standard mode
1 line (H): When the frame synchronizer is set to“Off” and the up-converter is set to“Off”
2 field (V): When the frame synchronizer is set to “On”, or the up-converter is set to “On”
• When the signals have passed through PinP, DVE, MultiView, down-converter, or DVI-IN, a maximum delay of 1 frame is applied in each case.

During 3G mode
2 line (H): When the frame synchronizer is set to [Off]
2 frame (V): When the frame synchronizer is set to [On]
• Maximum of 2 frame delay is added to each when passed through PinP, DVE, or MultiView.
Synchronous Terminal -
REF Terminal • Connectors: BNC
• Same field frequencies as those of the system formats supported
In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through)
• If the loop-through output is not used, provide a 75 Ω termination.
• In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported
• In the 1080/23.98PsF format, black burst signals with 10 Field ID
(SMPTE318M standard compliant) or Tri-level Sync signals supported
• In the 1080/24PsF format, Tri-level Sync signals supported
In internal sync mode: Black burst output signal ×2• Same field frequencies as those of the system formats supported
In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through)
• If the loop-through output is not used, provide a 75 Ω termination.
• In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported
• In the 1080/23.98PsF format, black burst signals with 10 Field ID
(SMPTE318M standard compliant) or Tri-level Sync signals supported
• In the 1080/24PsF format, Tri-level Sync signals supported
In internal sync mode: Black burst output signal ×2
LTC IN Terminal This is the LTC (linear time code) input terminal.
• Connectors: BNC
• Impedance: 1 kΩ
• Level: 1 to 2 V [p-p]
Accessories • AC cable AV‑HS60U2P: 2 cables
AV‑HS60U2E: 4 cables
• Rack-mounted rear panel support bracket
• Screws for the rack-mounted rear panel support bracket: 8 screws
• Operating Guide for the AV-HS6000 series (Excerpted Version)
Control Terminal -
LAN Terminal Compatible with 100Base-TX and AUTO-MDIX (For IP control)
• Connection cable: LAN cable (CAT5E), max. 100 m (328 ft), STP (Shielded Twisted Pair) cable recommended
• Connector: RJ-45
Panle Terminal Compatible with 100Base-TX and AUTO-MDIX (For Control Panel AV-HS60C2/AV-HS60C4 connection)
• Connection cable (supplied with AV-HS60C2/AV-HS60C4): LAN cable (CAT5E), straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft)
• Connector: RJ-45
COM4 (M/S) Terminal RS-422 Control Terminal
For master/slave connection for controlling external devices
• Connector: D-sub 9-pin (female), inch screw
• Switchable between master connection and slave connection via menu
GPI IN Terminal GPI IN: 18 inputs, general-purpose, photocoupler sensing
ALARM OUT: 1 output, open collector output (negative logic)
• Connector: D-sub 25-pin (female), inch screw
GPI OUT1/GPI OUT 2 terminal GPI OUT: 48 outputs, selected from general purpose, tally
Open collector output
• Connector: D-sub 25-pin (female) x 2, inch screw
COM1(M)/COM2(M)/COM3(M) Terminals RS-422 Control Terminal
For master connection for controlling external devices
• Connector: D-sub 9-pin (female) x 3, inch screw