AV-HS60C4 Short Control Panel

 
  • Chat with Sales

  • Contact us
  • Share

AV-HS60C4 $26,500.00

Product details

Control Panel - Redundant Power Supply Model

Contact Support

Chat with Sales

Weight Approx. 15.0 kg (33.0 lbs.) (excluding accessories)
Power supply AC100 V to 240 V, 50 Hz/60 Hz
(Supports redundant power supply)
Power consumption 40 W
Storage Temperature 0°C to 40°C (32°F to 104°F)
Storage Humidity 10% to 90% (no condensation)
Operating Ambient Humidity 10% to 90% (no condensation)
Operating Ambient Temperature 0°C to 40°C (32°F to 104°F)
Dimensions (W x H x D) 656 mm×160 mm×400 mm
(25-53/64 inches×6-19/64 inches×15-3/4 inches) (excluding protrusions)
(38-19/32 inches×6-1/32 inches×10-1/2 inches) (excluding protrusions)
Accessories • AC Cable: 2 cables
• LAN Cable: 1 cable (used to connect with the Mainframe AV-HS60U2)
• Switch blank cap (large): 16 caps
• Switch blank cap (small): 8 caps
ME Number 2 ME
Control Terminal -
Mainframe Terminal Compatible with 100Base-TX and AUTO-MDIX (For Mainframe AV-HS60U2 connection)
Connection cable (supplied with AV-HS60C4): LAN cable (CAT5E),Straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft)
• Connector: RJ-45
When connected to the terminal, no video will be displayed on the Menu Panel AV-HS60C3G.
Menu Panle Terminal Used only for the Menu Panel AV-HS60C3G
• Connector: DVI-D
• Because an independent signal format is used,cannot be displayed on a DVI-D monitor.
• Cannot be used concurrently with a DVI-D monitor connected to the terminal.
Select with the display selector switch.
DVI-D Terminal Used for displaying menus to the DVI monitor
• Connector: DVI-D
• Monitor resolution: 1366×768 compatible monitor
• Cannot be used concurrently with the terminal.
Select with the display selector switch.
USB Terminal For DVI monitor menu operation
• Connector: USB (type A, female)
• Cannot be used for the Menu Panel AV-HS60C3G.
Display Selector Switch Switch for selecting terminal or terminal
COM1 (M) Terminal RS-422 Control Terminal
For master connection for controlling external devices
• Connector: D-sub 9-pin (female), inch screw
COM2 (RS-232) Terminal RS-232 Control Terminal
For external device control connections
• Connector: D-sub 9-pin (male), inch screw
GPI I/O Terminal GPI IN: 8 inputs, general-purpose, photocoupler sensing
ALARM OUT: 1 output, open collector output (negative logic)
GPI OUT: 10 outputs, selected from general purpose, tally
Open collector output
• Connector: D-sub 25-pin (female), inch screw