Skip to content
Panasonic

Panasonic introduces the new PAN1783 Bluetooth 5.4 Low Energy Module

November 12, 2024

Panasonic is proud to introduce the new PAN1783 Bluetooth Low Energy (LE) module to its wireless module portfolio. This module is a 5.4 BLE device based on the Nordic nrf5340 single chip controller. It is available with an onboard chip antenna and RF-bottom pad for external antenna connection.

The PAN1783 has two Cortex®-M33 processors, one as an application processor and one as a network processor which easily allows it to be used in standalone mode. With the increased processing power as well as support for isochronous channels and LE Audio, this module is perfect for BLE audio applications.

The output power of up to +3 dBm and improved sensitivity of the nrf5340, in combination with the LE coded PHY, makes this module is an ideal choice for advanced computer peripherals and I/O devices, advanced wearables, wireless audio devices. It also has an ultra-low current consumption making it perfect for battery powered devices.

Features

  • Surface mount type dimensions: 15.6 mm × 8.7 mm × 2.2 mm
  • Same form factor as PAN1780 with the same pitch but one more pin
  • Nordic nRF5340 featuring two Cortex-M33 processors: one as an application processor, and the other one as a network processor
  • Bluetooth 5.4 LE including LE 2M and LE Coded PHY
  • Supports 802.15.4 ZigBee® and Thread
  • Includes ARM TrustZone CryptoCell 312, SPU, KMU, ACL
  • Security features: Trusted execution, root-of-trust, secure key storage, 128-bit AES
  • Up to 48× General Purpose I/Os (GPIO), which are shared by up to 5× SPI, 4× I²C, 4× UART, 4× PWM, 8× ADC, NFC-A, QSPI, nRESET
  • USB 2.0 full-speed device interface
  • APPROTECT available

Technical Characteristics

  • Typical sensitivity: -98 dBm (at 1 Mb/s) and -104 dBm (at 125 kb/s in LE-mode – long range)
  • Programmable from: +3 dBm to -20 dBm in 1 dB steps
  • Typical System current consumption: 0.9 μA (in System OFF), 1.3 μA (in System ON), 1.5 μA (in System ON with network core RTC running)
  • Typical Radio current consumption: 5.1 mA (at +3 dBm Tx power), 3.4 mA (at 0 dBm Tx power), 2.7 mA (in Rx at 1 Mbps), 3.1 mA (in Rx at 2 Mbps)
  • On-module DC-DC and LDO regulators with automated low current modes
  • Voltage range: 1.7 V to 5.5 V
  • Temperature range: -40 °C to 85 °C

Bluetooth

  • LE Audio: audio streaming over Bluetooth LE, multi-stream synchronized audio and Audio Sharing
  • Long Range
  • High-through-put 2 Mbps and Advertising Extensions features
  • Bluetooth mesh

This module is perfect for a wide variety of applications such as

  • Audio Applications
  • Smart Home/Building
  • IoT
  • Asset Monitoring
  • Medical
  • Lighting Control
  • Industrial

The new PAN1783 module is available for quotation and purchase through one of our valued distribution partners.

Block Diagram

Evaluation devices are available in Arduino form factor.

For additional information, please visit our Wireless Development Hub at https://pideu.panasonic.de/development-hub/