VIC100 - Top Filter / N-Type/ Base B

 

CCAH32ST24

Product details

N-type connector assembly with pole Mounting Base "B" and Top Filter included. Active L1 GPS antenna that is designed primarily for timing and synchronization for various industries. The VIC100 Series antenna features advanced filtering and immunity to noise interference as well as improved lightning protection.*

* refer to individual specs

Key features
  • Top filter included
  • N-type connector assembly, with mounting base "B" included
  • Passive dielectric patch antenna element
  • Active low noise amplifier / Filter - PWB assembly
  • Top radome of cone shaped plastic and bottom radome of aluminum casting assembly
Antenna - Overall specs -----------------------------------------------------
Polarization Right hand circular polarization
Bandwidth 1575.42 +/- 1.023 MHz
Power supply 3.5 - 6.0 V DC
Operating current 20mA (typical) 27mA (maximum)
Total gain 33dB (typical) / 25dB (minimum) at 90° elevation angle
Output VSWR 1.5 (typical) 2.5 (maximum)
Impedance 50 ohm
Lightning protection 80 V (typical) for IEC1000-4-5 standard
Water / dust proof -
Passive antenna -----------------------------------------------------
Gain 3.0dBi (minimum) at elevation angle 90° / -10dBi (minimum) at elevation angle 0°
Axial ratio 3dB (typical)
Filter/LNA -----------------------------------------------------
3dB bandwidth 1575.42 +/- 1.032 MHz (minimum)
Variation 1.0dB (maximum) measured at L1 band
Gain (typical) 28dB
Attenuation (filter) 60dB (typical) at 1575.4 +/- 50 MHz
1dB compression point 1.8dB (typical) 2.2 dB (maximum)
Noise figure -