VIC100 - N-Type / Base B



Product details

N-type connector assembly with pole Mounting Base "B" included. Active L1 GPS antenna that is designed primarily for timing and synchronization for various industries. The VIC100 Series antenna features advanced filtering and immunity to noise interference as well as improved lightning protection.*

* refer to individual specs

Key features
  • N-type connector assembly, with Mounting Base "B" included
  • Passive Dielectric Patch Antenna Element
  • Active Low Noise Amplifier / Filter - PWB assembly
  • Top radome of cone shaped plastic and bottom radome of aluminum casting assembly
Antenna - Overall specs -----------------------------------------------------
Polarization Right hand circular polarization
Bandwidth 1575.42 +/- 1.023 MHz
Power supply DC 5 +/- 0.5 V
Operating current 20mA (typical) 27mA (maximum)
Total gain 38dB (typical) / 30dB (minimum) at 90° elevation angle
Attenuation (antenna) 60dB (typical) at 1575.42 +/- 50 MHz
Output VSWR 1.5 (typical) 2.5 (maximum)
Impedance -
Lightning protection 80V (typical) for IEC1000-4-5 standard
Water / dust proof -
Passive antenna -----------------------------------------------------
Gain 3.0dBi (minimum) at 90° elevation angle / -10dBi (minimum) at 0° elevation angle
Axial ratio 3dB (typical)
Filter/LNA -----------------------------------------------------
3dB bandwidth 1575.42 +/- 1.023 MHz (minimum)
Variation 1.0dB (maximum) measured at L1 band
Gain (typical) 35dB
Attenuation (filter) 60dB (typical) at 1575.42 +/- 50 MHz
Noise figure 1.8dB (typical) 2.2 dB (maximum)
1dB compression point -