Single Channel Network Video Encoder
The GXE100 network video encoder provides control and recording features for 1 channel of H.264 video, with a simple browser based GUI for camera control, display mode configuration, setup and alarm functions.
|Product type||1 CH Video Encoder|
|Supported video compression||H.264 / M-JPEG|
|Supported video resolution||D1 (720 x 480) / VGA (640 x 480) / QVGA (320 x 240)|
|IPS (maximum)||30 fps / CH at H.264 in all resolutions|
|COAX PTZ control||-|
|Camera interface RS485||1x RS485, 2/4 wire, half duplex|
|Network interface||1x 10/100 Base-TX|
|SD memory card slot||-|
|SD card recording||-|
|Functions||Dual Stream / RTP over HTTP|
|Power source||PoE, 12 V DC|
|Power consumption||12 V DC: 200 mA / PoE 48 V: 75 mA|
Network video encoder
The WJ-GXE100 can deliver Full frame (Up to 30 fps) transmission at 640 x 480 image size. Excellent image clarity is assured through the use of adaptive interlace / progressive conversion, even with moving subjects, while an advanced long-distance cable degradation compensation system helps to maintain clear pictures at extreme cable lengths.
The built-in Video Motion Detector has 4 programmable detection areas, then transmit data via XML or video stream.