3.6V Cordless Clutch Screwdriver Kit
Our 3.6V 1.5Ah Li-Ion cordless auto shutoff clutch screwdriver offers one of the lightest and longest running low torque clutch tools available today. A durable all-steel clutch delivers 21-clutch positions and a wide torque range. Two-speed reversible trigger action and an ultra-ergonomic two-position handle offer high production and ultimate operator comfort. Batch counting enables accuracy and error proofing. Kit includes battery and charger.
- Two-speed reversible motor and 21-stage steel clutch with auto shutoff
- Batch count function with rehit prevention and 3 programmable tones for batch complete
- Drive 1,000 M5 x 5/16-inch screws into pre-drilled holes on a single battery charge
- Extreme versatility with 1/4" hex quick change chuck, drill and driver mode, LED light
- Clutch cover for operator lockout
Accuracy and Repeatability
Quality control requires repeatable fastening accuracy which is why Panasonic offers precision clutches in our assembly tools. With the torque accuracy of +/-5%, even tighter on some applications, precision and repeatability are further increased by shutting down the motor as the precision clutch disengages. The internal controller drops power to the motor significantly reducing torque reaction. Shutting power down early increases overall productivity which allows more fasteners per charge.
At only 1.1 lbs., this lightweight 3.6V 1.5Ah screwdriver can drive 1,000 M5 x 5/16-inch screws into pre-drilled holes on a single battery charge. Battery can be charged to a usable level in 15 minutes or fully charged in 30 minutes using the EYOL10B or EYOL11B chargers.
Lightweight, Big Power for Busy Assembly Lines
Compact and lightweight with the power to handle high-demand screw driving. Produces maximum torque of 39.0 in. lbs. in low speed and 13.3 in. lbs. in high speed. The 21-stage clutch adjusts torque from 2.7-25.68 in. lbs. in approximately 0.9 in. lbs. increments. A two-speed selector switch and reverse offers two no-load speeds of 0-200 rpm in low and 0-600 rpm in high.
Superior Ergonomics for Improved Worker Safety
Our screwdrivers are ergonomically designed with worker comfort in mind. At less than 1 lb, the two-position handle adjusts for optimal work access, allowing for one inline position and one standard pistol grip. This light weight balanced design, cushioned grip and minimal torque reaction, helps to reduce operator fatigue and injury while creating a healthier, more productive work environment.
Error-Proofing & Batch Counting
Assure operators fasten every screw in the assembly process. The screw count function keeps track of the screws you want to drive, preventing human error. The auto-stop function counts the number of screws driven and notifies you with a unique tone when the preset number of screws are reached. The counter automatically resets after reaching the preset quantity.
Quick-Set Control Panel
At quick glance, operators can confirm batch counts and battery levels. A touch on the intuitive control panel allows you to change batch counts on the fly. The “Hold” switch prevents accidental controller touches, ensuring your settings and count will not change. Tool retains the last count number even if battery dies and when you switch to a charged battery.
Fastener Rehit Prevention
The double counting prevention feature prevents accidental rehits from altering batch count. Even if a screw is continuously tightened twice and work is completed within set time, the fastener is not counted. A quick controller change via the keypad can lockout the batch count feature for up to 3 seconds.
Light up Dark Work Areas
A built-in LED light allows operators to illuminate dimly lit work areas for fast, accurate assembly. Ideal for gaining better visibility in tight, enclosed or deep dark spaces. The auto shut-off features turns light off after five minutes of idle operation to conserve battery power.