Sorry, you need to enable JavaScript to visit this website.

PT-RW930U 1-Chip DLP™ Fixed Installation Laser Projector Discontinued

  • Chat with Sales
  • Contact us

PT-RW930

Product details

10,000 lumens-class compact Solid Shine laser projector Designed for intensive usage and long lasting brightness in education, museums, exhibitions and digital signage applications

Key features

  • Laser 1-chip DLP, 10000 lumens (center), WXGA
  • High brightness and excellent image quality with laser light source
  • Maintenance free up to 20000 hours with dust-resistant optical block and long lasting laser engine
  • Free 360 degrees installation
  • 10,000:1 contrast ratio
  • Digital Link
  • 24/7 Operation
  • Solid Shine Laser
  • Geo Pro
  • 360-Degree Free Installation
View Product Support

Chat with Sales

Specification Description
Power supply AC100 - 240V 10.4-5.0A 50Hz/60Hz
Power consumption 1,050W
NORMAL: 742W ECO: 617W LONG LIFE1: 410-588
LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W
STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W
STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2,297 ft),
ICE62087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic Contrast2
BTU value Max 3,584 BTU
Lens | PT-RW930B/W Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm
Lens | PT-RW930LB/LW Optional powered zoom/focus lenses and ‰xed-focus lens
Light source Laser Diode Laser class 1(Class3R for US models)
Luminance life for set: 20,000 hours at half luminance (normal)/
24,000 hours at half luminance (Eco)
* Temperature: 30°C (86°F), Altitude 700m (2,297 ft), Dust: 0.15mg/m3
Dynamic Contrast3
43,800 hours at constant luminance (LONG LIFE1)
61,320 hours at constant luminance (LONG LIFE2)
87,600 hours at constant luminance (LONG LIFE3)
Screen size 1.27- 15.24 m (50-600 inches) (16:10 aspect ratio)
*1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
*2.54 - 7.62 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
Brightness*3 10,000 lumens (Center)*2/ 9,400 lumens*3
9,400 lumens (Half luminance) (NORMAL)
7,500 lumens (Half luminance) (ECO)
3,700 lumens (Constant luminance) (LONG LIFE1)
3,100 lumens (Constant luminance) (LONG LIFE2)
2,500 lumens (Constant luminance) (LONG LIFE3)
Center-to-corner uniformity*3 90%
Contrast*3 10,000:1 (All White/All Black) (Dynamic Contrast3)
Scanning frequency | HDMI/DVI-D fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz
525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible with non-interlaced signals only
Scanning frequency | RGB fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
Scanning frequency | YPBPR (YCBCR) 525i (480i): fH 15.73 kHz; fV 59.9 Hz,
625i (576i): fH 15.63 kHz; fV 59.9 Hz,
525p (480p): fH 31.50 kHz; fV 60 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency | Video/S-Video fH: 15.73 kHz, fV: 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: +60%, -16%(powered),
Horizontal: +30%, -10%
(When using the ET-DLE085/DLE105, +28%, -10%) (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055.
If using the ET-DLE030, the optical axis is fixed.
Installation Ceiling/floor, front/rear, 360 degree free installation
Terminals | HDMI IN HDMI 19-pin × 1, Deep Color, compatible with HDCP,
Terminals | DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only
Terminals | RGB 1 IN BNC × 5
Terminals | RGB 1 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals | RGB 1 IN | Y/C Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals | RGB 1 IN | Video 1.0Vp-p, 75 ohms
Terminals | RGB 2 IN D-sub HD 15-pin (female) × 1
Terminals | RGB 2 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | SERIAL/MULTI PROJECTOR SYNC IN D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
Terminals | SERIAL/MULTI PROJECTOR SYNC OUT D-sub 9-pin (male) x 1 for link control
Terminals | Remoter 1 In M3 jack x 1 for wired remote control
Terminals | Remoter 1 Out M3 jack x 1 for link control (for wired remote control)
Terminals | Remoter 2 In D-sub 9-pin (female) x1 for external control (parallel)
Terminals | LAN/DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 1)
Deep Color, HDCP
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) PT-RW930B/RW930W:
498 x 200*5 x 581mm
(19-19/32 x 7-7/8*5 x 22-7/8in ) with supplied lens
PT-RW930LB/RW930LW:
498 x 200*5 x 538 mm
(19-19/32 x 7-7/8*5 x 21-3/16in) without lens
Weight PT-RW930B/RW930W:
Approx. 23.2kg (51.1lbs) with supplied lens
PT-RW930LB/RW930LW:
Approx. 22.4kg (49.4lbs) without lens
Operation noise 41dB (37dB[QUIET1] / 35dB[QUIET2])
Operating temperature 0-45 °C (32-113 °F) * 6
Operating humidity 10%-80% (no condensation)
Note *1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate.
*2 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/IEC 21118:2012 international standards.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*5 with legs at shortest position.
*6 Limits the luminance when used in locations from 0m to 2,700m (0ft to 8,858ft) above sea level at ambient temperatures of 35°C (95°F) or higher,
or from 2,700m to 4,200m (8,858ft to 13,780ft) above sea level at ambient temperatures of 25°C (77°F) or higher.
Brightness 10,000 lumens (Center)/ 9,400 lumens
Resolution WXGA 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
Technology 1-Chip DLP Laser
DLP™ chip | Panel size 16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
DLP™ chip | Display method DLP™ chip × 1, DLP™ system
DLP™ chip | Pixels 1,024,000 (1280 × 800) × 1, total of 1,024,000 pixels

ET-DLE020 1-Chip DLP™ Projector Ultra Short Throw Zoom Lens

panasonic-et-dle020-1-chip-dlp-projector-ultra-short-throw-lens-main-product-image

ET-DLE020